Abstract:The energy density of the inductive energy storage systems is one order of magnitude higher than that of the capacitive ones. The STRETCH meat grinder with ICCOS put forward by Tsinghua University is a typical inductive pulsed power supply for electromagnetic launch system, which has remarkable current amplification ability as a single module. But one module can not provide enough amplitude and width for the load current of the railgun launching. So the collaborative work of multiple inductive source modules is necessary. In this paper the designed inductive power supply system of about 1MJ is composed of 40 STRETCH meat grinder with ICCOS modules. All the main switches are opened simultaneously to reduce the magnetic field coupling among the modules and make the current rising edge steep. The modules are divided into groups. The triggering delays of the thyristors between every two adjacent groups are carefully designed. After the first period triggers for all the modules, the energy stored on the capacitors can be further utilized with the second period triggers. The numerical analysis and the simulation results show that the appropriate collaborative triggering delay can increase the adjustability of the output current width and the second period triggers can further increased the current width and increase the system efficiency. So the load current with flat shape, appropriate amplitude, and longer duration can be provided with modular design and collaborate triggering discharge of multiple modules. This can provide a theoretical foundation for the future study and implementation.

Meat Grinder with ACC Circuit: A Novel Circuit for Inductive Pulsed Power Supplies

The Meat Grinder With CPFU: A Novel Circuit for Inductive Pulsed Power Supplies

Analysis of the Capacitor-Aided Meat Grinder Circuits for an Inductive Pulsed Power Supply

Analysis and Research on a Mega-Hz-level Super High Frequency Induction Heating Power Supply Converter

The Meat Grinder With SECT Circuit

Research on 50 kJ meat grinder with SECT inductive pulsed power supply

Review of the Meat Grinder Circuits for Railguns

Discussion of Countercurrent Circuit for STRETCH Meat Grinder with ICCOS

Design of an Inductive Power Transfer System with Constant Current and Constant Voltage Outputs Based on Multi-frequency Circuit

A Novel Ultra-High Frequency Power Supply for Induction Heating

Discussion on Topologies of Quick Response IPPS Suitable for Closed-Loop Control of EML

An Inductive-capacitive Hybrid Pulsed-power Supply for Electromagnetic Launch

Determining Key Parameters for the STRETCH Meat Grinder Circuit

Parameter Analysis of the Energy Transfer Capacitor in the Meat Grinder with SECT Circuit

System Implementation and Testing of the STRETCH Meat Grinder With ICCOS

Study on the recovery circuit based on multi-module STRETCH meat grinder

Parameter Analysis and Optimized Configuration of the PFU for Inductive Storage Systems

Comparisons of Three Inductive Pulse Power Supplies

Study on the Collaborative Triggering of Multiple Stretch Meat Grinder with Iccos Modules

A New Pulse-Compression Circuit with Residual Energy Recovered.