Abstract:A single nanosecond-pulse discharge can produce a high-intensity pulsed acoustic wave. The pulse width of the acoustic wave is much wider than that of the current, more than 20 μs at 30 cm from the source, which is the basis of synthesizing low-frequency sound by repetitively nanosecond-pulse discharges. The investigations of electroacoustic characteristics and the sound formation process of the single nanosecond-pulse discharge are vital to advance this technology. In this paper, an experimental platform for the single nanosecond-pulse discharge was built, and time-domain waveforms of the voltage, the current, and the sound pressure were measured. The effects of electrode shape, current limiting resistors, and current pulse width on the acoustic wave were discussed. To analyze the formation process of the acoustic wave, the gas densities near the electrodes at different moments after the discharge were diagnosed by laser Schlieren photography. The result shows that the formation of the acoustic wave is much slower than the discharge. A two-stage model was developed to qualitatively describe the formation process of the acoustic wave, and numerical calculations were carried out using thermodynamic and hydrodynamic equations. At the end of the discharge, a huge pressure difference is formed inside and outside the gas channel due to the Joule heating, which can be considered as a shock wave. During the outward propagation, the wave tail is elongated by the difference in sound velocity at each point, and the thickness of the shock wave increases due to the dissipation. This eventually leads to the half-duration of more than 20 μs.

Pulse-Width-Modulated Plasma Sound Source

Experimental Study of the Electric Pulse-Width Effect on the Acoustic Pulse of a Plasma Sparker

A High-Voltage Pulse Generator for Corona Plasma Generation

Plasma Seismic Source and Its Application in Oceanic Seismic Exploration

A 10 Kw High-Voltage Pulse Generator for Corona Plasma Generation

A Repetitive Pulser with Four Spark Gap Switches

A Triggered Spark-Gap Switch for High-Repetition Rate High-Voltage Pulse Generation

A Compact High-Power Ultra-Wideband Bipolar Pulse Generator

Development of a Pulse Generator for Exciting Plasma

Underwater sound source based on pulsed corona discharge

Single-cycle Powerful Megawatt to Gigawatt Terahertz Pulse Radiated from a Wavelength-Scale Plasma Oscillator

A Repetitive High Voltage Pulse Adder Based on Solid State Switches

Single-cycle Megawatt Terahertz Pulse Generation from a Wavelength-Scale Plasma Oscillator Driven by Ultrashort Laser Pulses

Repetitive High Voltage Rectangular Waveform Pulse Adder for Pulsed Discharge of Capacitive Load

Megahertz high voltage pulse generator suitable for capacitive load

A high repetition-rate bipolar submicrosecond pulse generator based on magnetic pulse compression system

New Prototype of Underwater Sound Source Based on the Pulsed Corona Discharge

Investigation of the Microsecond-Pulse Acoustic Wave Generated by a Single Nanosecond-Pulse Discharge

Solid-State Bipolar Pulsed Power Modulator for High-Efficiency Production of Plasma Activated Water

A compact 4 GW pulse generator based on pulse forming network-Marx for high-power microwave application.

A Current-Fed Resonant Plasma Source with Energy Compression Over Full Power Range