Abstract:Water treatment is one of the most important issues for all walks of life around the world. The unique advantages of the solid-state power electronic pulses in water treatment make it attractive and promising in practical applications. The output voltage, rising time, repetition rate, and peak power of output pulses have a significant impact on the effectiveness of water treatment. Especially in pulse electric field treatment and pulse discharge treatment, the pulse with fast rising time achieves the advantage of generating plasma without corona, which can avoid water heating effect and greatly improve the efficiency of the pulse generator. High repetition rate can significantly reduce the peak power requirement of the pulse in water treatment application, making the equipment smaller and improving the power density. Therefore, the study developed a high-voltage high frequency sub-nanosecond pulse power generator (PPG) system for wastewater treatment. It adopts SiC DSRD (Drift Step Recovery Diode) solid-state switches and realize modular design, which can achieve high performance and can be flexible expanded according to the requirements of water treatment capacity. Finally, an expandable high-voltage PPG for water treatment is built. The output parameters of the PPG include output pulse voltage range from 1 to 5.28 kV, rise time <600 ps (20%-90%), repetition up to 1 MHz. The experiment results of PPG application for pulse discharge water treatment is presented. The results indicate that the proposed generator achieves high-efficiency degradation of 4-Chlorophenol (4-CP), which is one of the most common chlorophenol compounds in wastewater. From experiment, the homemade system can degrade 450 mL waste water containing 500 mg/L 4-CP in 35 min, with a degradation rate of 98%. Thereby, the requirement for electric field intensity decreased. Through the further quantitative analysis, the impact of frequency, voltage, and electrode spacing on the degradation effect of 4-CP is confirmed.

Solid-State Bipolar Pulsed Power Modulator for High-Efficiency Production of Plasma Activated Water

AC/DC Power Modulation for Corona Plasma Generation

Solid-State Bipolar Pulsed-Power Modulator Based on a Half-Bridge Power Cell Structure

Pulse-Width-Modulated Plasma Sound Source

Pulsed Corona Generation Using a Diode-Based Pulsed Power Generator

Evaluation of Pulsed Power Sources for Plasma Generation

Pulsed Corona Generation Using a High-Power Semiconductor Diode Switch

Bipolar High-Repetition-rate High-Voltage Nanosecond Pulser.

A New High-Power Density Tailored Waveform Modulator for Plasma Processing

Development of a New Bipolar Square Wave High-Voltage Pulse Power Supply

A Novel High-Frequency Bipolar Pulsed Power Generator for Biological Applications

A solid-state pulse power sub-nanosecond SiC DSRD-based generator with high-voltage and high repetition frequency for pulse discharge water treatment

Design of 130 MW High Power Pulse Modulator

A Repetitive High Voltage Pulse Adder Based on Solid State Switches

Design of bipolar pulsed magnetron sputtering power supply

Continuous production for large quantity plasma activated water using multiple plasma device setup

All Solid-State Marx Modulator with Bipolar High-Voltage Fast Narrow Pulses Output

A Specially Designed Plc-Based High-Voltage Pulse Modulator for Plasma Immersion Ion Implantation

Advances in High-Voltage Modulators for Applications in Pulsed Power and Plasma-Based Ion Implantation

An All Solid-State Pulsed Power Generator for Plasma Immersion Ion Implantation (PIII)

An Energy-Based Analysis of High Voltage Resonant-Based Pulsed Low Power Converter for Water Treatment Application