Abstract:Background The Shanghai synchrotron radiation facility (SSRF) is a third generation light source. It has been in operation for user experiment in decay mode since 2009. Meanwhile, the top-up operation is also under exploration in order to provide users with stable beam. A key technique for top-up mode is optimizing the injection efficiency by precisely controlling the injecting bunch charge. Therefore, it is essential to measure precisely the bunch charge at the high-energy transport line. The direct-current current transformers (DCCT) can measure the average beam current but can't measure the single bunch charge. Although the integrating current transformer (ICT) can measure the individual bunch charge, it is sensitive to different background noise with a resolution of less than 1% and even worse under low bunch charge case. [Purpose] This study aims to improve the measuring resolution for the injected individual bunch charge by using cavity charge monitor. [Methods] Since the cavity monitor has high sensitivity and high resolution, it will be used to extract the bunch charge information. Normally, the cavity monitor works at C-band frequency and the generated radio frequency signal (RF) has to be down-converted to intermediate frequency (IF) signal. Thus a dual-cavity monitor working at different frequencies was developed to realize the two RF signals self-mixing. Moreover, because of the limited signal sampling rate, the four channel signal splicing scheme with strict synchronous phase-locked sampling technique was addopted to further improve the sampling rate. [Results] The experimental results show that IF signal amplitude is linear to the bunch charge quantity. Moreover, the test results presents the measuring sensitivity is better than 0.03%. [Conclusion] The novel dual cavity bunch charge system works well and meets the requirement of injection bunch charge measurement.

Research and applications of bunch purity monitor at SSRF

Research of bunch by bunch data acquisition system in SSRF

Beam Instrumentation System Optimization for Top-up Operation in SSRF

Monitoring the Charge Bunch-by-bunch for the SSRF Storage Ring： Development and Application

Bunch-by-bunch Longitudinal Phase Monitor at SSRF

Upgrade of Bunch Phase Monitor at SSRF Storage Ring

A method of bunch by bunch measurement at nanoseconds interval by using cavity beam position monitors

Beam instrumentation system development and commissioning in ssrf

LOW Q CAVITY BPM STUDY FOR THE BEAM POSITION MEASUREMENT OF NANOSECOND SPACED ELECTRON BUNCHES *

Optimization of the Cavity Beam-Position Monitor System for the Shanghai Soft X-ray Free-Electron Laser User Facility

Bunch-by-bunch Beam Lifetime Measurement at SSRF

Bunch-by-bunch Three-Dimensional Position and Charge Measurement in a Storage Ring

Experimental Study Using Touschek Lifetime As Machine Status Flag in SSRF

Bunch-by-bunch Beam Size Measurement During Injection at Shanghai Synchrotron Radiation Facility

Development of fiber beam loss monitor based on Cerenkov principle

Study on precise bunch current measurement based on dual cavity monitor

Bunch-by-Bunch Study of the Transient State of Injection at the SSRF

Signal Processing Algorithm Optimization of Bunch-by-bunch Phase Measurement System for Storage Ring

Touschek lifetime study based on the precise bunch-by-bunch BCM system at SSRF

Real Time Bunch-by-Bunch Luminosity Monitor for BEPCII

Design and Testing of a Bunch-by-bunch Beam Position Transverse Feedback Processor