Abstract:Background The Shanghai synchrotron radiation facility (SSRF) is a third generation light source. It has been in operation for user experiment in decay mode since 2009. Meanwhile, the top-up operation is also under exploration in order to provide users with stable beam. A key technique for top-up mode is optimizing the injection efficiency by precisely controlling the injecting bunch charge. Therefore, it is essential to measure precisely the bunch charge at the high-energy transport line. The direct-current current transformers (DCCT) can measure the average beam current but can't measure the single bunch charge. Although the integrating current transformer (ICT) can measure the individual bunch charge, it is sensitive to different background noise with a resolution of less than 1% and even worse under low bunch charge case. [Purpose] This study aims to improve the measuring resolution for the injected individual bunch charge by using cavity charge monitor. [Methods] Since the cavity monitor has high sensitivity and high resolution, it will be used to extract the bunch charge information. Normally, the cavity monitor works at C-band frequency and the generated radio frequency signal (RF) has to be down-converted to intermediate frequency (IF) signal. Thus a dual-cavity monitor working at different frequencies was developed to realize the two RF signals self-mixing. Moreover, because of the limited signal sampling rate, the four channel signal splicing scheme with strict synchronous phase-locked sampling technique was addopted to further improve the sampling rate. [Results] The experimental results show that IF signal amplitude is linear to the bunch charge quantity. Moreover, the test results presents the measuring sensitivity is better than 0.03%. [Conclusion] The novel dual cavity bunch charge system works well and meets the requirement of injection bunch charge measurement.

Study on precise bunch current measurement based on dual cavity monitor

Monitoring the Charge Bunch-by-bunch for the SSRF Storage Ring： Development and Application

Research of bunch by bunch data acquisition system in SSRF

A method of bunch by bunch measurement at nanoseconds interval by using cavity beam position monitors

Optimization of the Cavity Beam-Position Monitor System for the Shanghai Soft X-ray Free-Electron Laser User Facility

Beam Instrumentation System Optimization for Top-up Operation in SSRF

LOW Q CAVITY BPM STUDY FOR THE BEAM POSITION MEASUREMENT OF NANOSECOND SPACED ELECTRON BUNCHES *

In situ beam trajectory tilt measurement based on single cavity beam position monitor

Design and Measurement of Signal Processing System for Cavity Beam Position Monitor

Applications for Synchrotron Radiation in Inertial Confinement Fusion Research

Study of the Crosstalk Evaluation for Cavity BPM

High-resolution Cavity Bunch Arrival-Time Monitor for Charges Less Than 1 Pc

Cavity-based bunch length measurement study for the Super Tau-Charm Facility transport line

Bunch Charge Monitoring System Based on Integrating Current Transformer

The bunch current measurement using high-speed photodetector at HLS II

Rf Deflecting Cavity Design For Bunch Length Measurement Of Photoinjector At Tsinghua University

Study on the magnetic measurement results of the injection system for CSNS/RCS

Rf Deflecting Cavity for Bunch Length Measurement in Tsinghua Thomson Scattering X-Ray Source

Monitoring of Electron Bunch Length by Using Terahertz Coherent Transition Radiation

Design and Simulation of a high order mode cavity bunch length monitor

Status of non-destructive bunch length measurement based on coherent Cherenkov radiation