Assessing delamination initiation from fiber and matrix properties

Zheng-Ming Huang,Jia-Jie Gu

2017-01-01

Abstract:Delamination generally occurs due to an edge effect. As the laminate is essentially bonded together form the individual laminate by the matrix, any delamination of the laminate must be initiated from a matrix failure and thus controlled by the stresses of the matrix. Based on this viewpoint, this paper predicts the initiation of laminate delamination through analyzing the stresses of the matrix. The stress field of a symmetrically laminated plate under an axial load is calculated by a three-dimensional finite element approach. To deal with the weak singularity occurred in the interlaminar stresses at the free edge, an average for the stresses of each lamina with respect to its thickness is carried out, and the internal stresses in the fiber and matrix of the lamina are determined in terms of the Bridging micromechanics Model. The thus obtained homogenized internal stresses must be converted into “true” values before a failure assessment can be made with respect to the original strength data of the fiber and matrix. Whereas the true stresses of the fiber are the same as its homogenized ones, those of the matrix are obtained by multiplying its homogenized quantities by respective stress concentration factors (SCFs) of the matrix in the composite. Such an SCF cannot be defined following a classical approach. All of the SCFs with perfect interface bonding and the transverse tensile SCF with a debonded interface have been calculated. Finally, an in-plane failure and a delamination initiation are considered separately for the laminate. The most important feature of this work is in that only the original elastic and strength data of the fiber and matrix are required in the prediction of a delamination initiation. Our predictions correlate reasonably with the available experimental data.