Abstract:The human wrist, a complex articulation of skeletal muscles and two-carpal rows, substantially contributes to improvements in maneuverability by agilely performing three-degree-of-freedom (3-DOF) orienting tasks and regulating stiffness according to variations in interaction forces. However, few soft robotic wrists simultaneously demonstrate dexterous 3-DOF motion and variable stiffness; in addition, they do not fully consider a soft-rigid hybrid structure of integrated muscles and two carpal rows. In this study, we developed a soft-rigid hybrid structure to design a biomimetic soft robotic wrist (BSRW) that is capable of rotating in the x and y directions, twisting around the z -axis, and possessing stiffness-tunable capacity. To actuate the BSRW, a lightweight soft-ring-reinforced bellows-type pneumatic actuator (SRBPA) with large axial, linear deformation ( η lcmax =70.6%, η lemax =54.3%) and small radial expansion ( η demax =3.7%) is designed to mimic the motion of skeletal muscles. To represent the function of two-carpal rows, a compact particle-jamming joint (PJJ) that combines particles with a membrane-covered ball-socket mechanism is developed to achieve various 3-DOF motions and high axial load-carrying capacity (>60 N). By varying the jamming pressure, the stiffness of the PJJ can be adjusted. Finally, a centrally positioned PJJ and six independently actuated SRBPAs, which are in an inclined and antagonistic arrangement, are sandwiched between two rigid plates to form a flexible, stable, and compact BSRW. Such a structure enables the BSRW to have a dexterous 3-DOF motion, high load-carrying ability, and stiffness tunability. Experimental analysis verify 3-DOF motion of BSRW, producing force of 29.6 N and 36 N and torque of 2.2 Nm in corresponding rotations. Moreover, the range of rotational angle and stiffness-tuning properties of BSRW are studied by applying jamming pressure to the PJJ. Finally, a system combining a BSRW and a soft enclosing gripper is proposed to demonstrate outstanding manipulation capability in potential applications.

Design of a Novel Cable-Driven 3-DOF Series-Parallel Wrist Module for Humanoid Arms

Design and Simulation Experiment of Rigid-Flexible Soft Humanoid Finger

Innovative Design Research on a Cable-Driven Humanoid Robotic Arm

Design and Development of a 7-DOF Humanoid Arm

Development of a redundant anthropomorphic hydraulically actuated manipulator with a roll-pitch-yaw spherical wrist

Design of Humanoid Robotic Hand Based on Link Underactuation

Design and Stiffness Analysis of a Novel 7-DOF Cable-Driven Manipulator

Optimal Design of a 3-DOF Cable-Driven Upper Arm Exoskeleton

Type synthesis of a 3-DOF wrist applying the coupled-input cable-driven parallel robot

Design, simulation, and experimental evaluation of a light weight, and wearable cable driven ForeWrist exoskeleton robot for assistance and rehabilitation

A Novel 3-DOF Spherical Hybrid Mechanism for Wrist Movement: Design, Kinematics, and Simulation

A Monolithic Cable-Driven Compliant Wrist for Prosthetic Arms

Design of a 7-Dof Anthropomorphic Arm Inspired from the Structure of Human Joints

Development of the Biomech-Wrist: A 3-DOF Exoskeleton for Rehabilitation and Training of Human Wrist

Design and development of a 3-DoF robotic wrist joint with tension amplification mechanism

Modeling and Control of a Novel Variable Stiffness Three DoFs Wrist

Design and Nonlinear Modeling of a Modular Cable Driven Soft Robotic Arm

Biomimetic soft robotic wrist with 3-DOF motion and stiffness tunability based on ring-reinforced pneumatic actuators and a particle jamming joint

Design and Analysis of a Flexible, Elastic, and Rope-Driven Parallel Mechanism for Wrist Rehabilitation

Design and Characterization of a High-performance Wearable Robot Using Symmetric Conjugate Surface Joints

A Novel Design of a Multi-Fingered Bionic Hand With Variable Stiffness for Robotic Grasp