Abstract:Underwater manipulators are important robotic tools in the exploration of the ocean environment. Up to now, most existing underwater manipulators are rigid and with fixed 5 or 7 degrees of freedom (DOF), which may not be very suitable for some complicated underwater scenarios (e.g., pipe networks, narrow deep cavities, etc.). The biomimetic concept of muscles and tendons is also considered as continuum manipulators, but load capacity and operation accuracy are their essential drawbacks and thus limit their practical applications. Recently, the cable-driven technique has been developed for manipulators, which can include numerous joints and hyper-redundant DOF to execute tasks with dexterity and adaptability and thus they have strong potential for these complex underwater applications. In this paper, the design of a novel cable-driven hyper-redundant manipulator (CDHRM) is introduced, which is driven by multiple cables passing through the tubular structure from the base to the end-effector, and the joint numbers can be extended and decided by the specific underwater task requirements. The kinematic analysis of the proposed CDHRM is given which includes two parts: the cable-joint kinematics and the joint-end kinematics. The geometric relationship between the cable length and the joint angles are derived via the established geometric model for the cable-joint kinematics, and the projection relationship between the joint angles and end-effector’s pose is established via the spatial coordinate transformation matrix for the joint-end kinematics. Thus, the complex mapping relationships among the cables, joints and end-effectors are clearly achieved. To implement precise control, the kinematic control scheme is developed for the CDHRM with series-parallel connections and hyper-redundancy to achieve good tracking performance. The experiment on a real CDHRM system with five joints is carried out and the results verify the accuracy of kinematics solution, and the effectiveness of the proposed control design. Particularly, three experiments are tested in the underwater environment, which verifies its good tracking performance, load carrying and grasping capacity.

Type synthesis of a 3-DOF wrist applying the coupled-input cable-driven parallel robot

Type Synthesis of a Fully Decoupled Parallel Wrist Manipulator

Development of a redundant anthropomorphic hydraulically actuated manipulator with a roll-pitch-yaw spherical wrist

Type synthesis of 5-DOF redundantly actuated parallel robots for super-large components with complicated surfaces.

Design and Stiffness Analysis of a Novel 7-DOF Cable-Driven Manipulator

Innovative Design Research on a Cable-Driven Humanoid Robotic Arm

Type Synthesis Of 2-Dof Rotational Parallel Manipulators With An Equal-Diameter Spherical Pure Rolling Motion

Type Synthesis of 2T1R Planar Parallel Mechanisms and Their Moduling Development Applications

Design and Kinematic Control of the Cable-Driven Hyper-Redundant Manipulator for Potential Underwater Applications

Kinematic analysis and design optimization of a cable-driven universal joint module

Type synthesis of single-loop 3T1R-parallel mechanisms with a multi-DOF drive system

A novel design method for a reconfigurable two-drive cable-driven parallel robot

A Cable-Driven Parallel Robot With Full-Circle End-Effector Rotations

Configuration Synthesis for Fully Restrained 7-Cable-driven Manipulators

Optimal Design of a 3-DOF Cable-Driven Upper Arm Exoskeleton

Type Synthesis of 3-DOF Translational Parallel Manipulators Based on Atlas of DOF Characteristic Matrix

Type synthesis of a family of novel parallel leg mechanisms driven by a 3-DOF drive system

Type synthesis approach for the 2R1T compliant parallel mechanism with a suitable constrained branch

Inverse Kinematics and Workspace Analysis of a 3 DOF Flexible Parallel Humanoid Neck Robot

Design and Control of a Novel Cable Driven Parallel Mechanism

Design of a Cable-Driven Parallel Robot for the Cervical Spine Motion Training