Abstract:Underwater manipulators are important robotic tools in the exploration of the ocean environment. Up to now, most existing underwater manipulators are rigid and with fixed 5 or 7 degrees of freedom (DOF), which may not be very suitable for some complicated underwater scenarios (e.g., pipe networks, narrow deep cavities, etc.). The biomimetic concept of muscles and tendons is also considered as continuum manipulators, but load capacity and operation accuracy are their essential drawbacks and thus limit their practical applications. Recently, the cable-driven technique has been developed for manipulators, which can include numerous joints and hyper-redundant DOF to execute tasks with dexterity and adaptability and thus they have strong potential for these complex underwater applications. In this paper, the design of a novel cable-driven hyper-redundant manipulator (CDHRM) is introduced, which is driven by multiple cables passing through the tubular structure from the base to the end-effector, and the joint numbers can be extended and decided by the specific underwater task requirements. The kinematic analysis of the proposed CDHRM is given which includes two parts: the cable-joint kinematics and the joint-end kinematics. The geometric relationship between the cable length and the joint angles are derived via the established geometric model for the cable-joint kinematics, and the projection relationship between the joint angles and end-effector’s pose is established via the spatial coordinate transformation matrix for the joint-end kinematics. Thus, the complex mapping relationships among the cables, joints and end-effectors are clearly achieved. To implement precise control, the kinematic control scheme is developed for the CDHRM with series-parallel connections and hyper-redundancy to achieve good tracking performance. The experiment on a real CDHRM system with five joints is carried out and the results verify the accuracy of kinematics solution, and the effectiveness of the proposed control design. Particularly, three experiments are tested in the underwater environment, which verifies its good tracking performance, load carrying and grasping capacity.

Design and Stiffness Analysis of a Novel 7-DOF Cable-Driven Manipulator

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

Design and Analysis of 7-DOF Cable-Driven Manipulator

Stiffness Optimization of Cable-Driven Humanoid Manipulators

Development of a redundant anthropomorphic hydraulically actuated manipulator with a roll-pitch-yaw spherical wrist

Design and Kinematic Control of the Cable-Driven Hyper-Redundant Manipulator for Potential Underwater Applications

Design and Nonlinear Modeling of a Modular Cable Driven Soft Robotic Arm

Design Paradigm for Human Size Manipulator with High Payload, Repeatability, and Bandwidth

A Novel Cable-Driven Joint Module for Space Manipulators: Design, Modeling, and Characterization

Optimal Design of a 3-DOF Cable-Driven Upper Arm Exoskeleton

Structural Design and Static Analysis of a Cable-Driven Underactuated Manipulator with Locking Devices

Innovative Design Research on a Cable-Driven Humanoid Robotic Arm

Tension Optimization of a Cable-Driven Coupling Manipulator Based on Robot Dynamics with Cable Elasticity.

A Modular, Tendon Driven Variable Stiffness Manipulator with Internal Routing for Improved Stability and Increased Payload Capacity

A Novel Elbow-Inspired Cable-Driven Tensegrity Joint: Bionic Design, Coupled Kinematics, and Load Performance

Development of a linear decoupling cable-driven manipulator with independent driving joints ,

Kinematics Analysis of a Novel 7-DOF Humanoid Manipulator for Table Tennis

Cable Tension Analysis Oriented the Enhanced Stiffness of a 3-DOF Joint Module of a Modular Cable-Driven Human-Like Robotic Arm

Mechanism Design, Kinematics and Dynamics Analysis of a 7-Degree-Of-Freedom (DOF) Cable-Driven Humanoid Robot Arm

A Lightweight Redundant Manipulator with High Stable Wireless Communication and Compliance Control

Design and validation of cable-driven hyper-redundant manipulator with a closed-loop puller-follower controller