Abstract:It is a common belief that service robots shall move in a human-like manner to enable natural and convenient interaction with a human user or collaborator. In particular, this applies to anthropomorphic 7-DOF redundant robot manipulators that have a shoulder-elbow-wrist configuration. On the kinematic level, human-like movement then can be realized by means of selecting a redundancy resolution for the inverse kinematics (IK), which realizes human-like movement through respective nullspace preferences. In this paper, key positions are introduced and defined as Cartesian positions of the manipulator’s elbow and wrist joints. The key positions are used as constraints on the inverse kinematics in addition to orientation constraints at the end-effector, such that the inverse kinematics can be calculated through an efficient analytical scheme and realizes human-like configurations. To obtain suitable key positions, a correspondence method named wrist-elbow-in-line is derived to map key positions of human demonstrations to the real robot for obtaining a valid analytical inverse kinematics solution. A human demonstration tracking experiment is conducted to evaluate the end-effector accuracy and human-likeness of the generated motion for a 7-DOF Kuka-LWR arm. The results are compared to a similar correspondance method that emphasizes only the wrist postion and show that the subtle differences between the two different correspondence methods may lead to significant performance differences. Furthermore, the wrist-elbow-in-line method is validated as more stable in practical application and extended for obstacle avoidance.

Kinematics Analysis of a Novel 7-DOF Humanoid Manipulator for Table Tennis

Kinematics and trajectory planning of a novel humanoid manipulator for table tennis

A Solution of Inverse Kinematics for 7-DOF Manipulators and Its Application

Design of a Redundant Manipulator for Playing Table Tennis Towards Human-Like Stroke Patterns

Kinematic Analysis and Solution of the Natural Posture of a 7DOF Humanoid Manipulator

Kinematics and Singularity Analysis of a Novel 7-DOF Humanoid Arm Based on Parallel Manipulating Spherical Joints

An Analytical Algorithm for Inverse Kinematics of Series Parallel Hybrid 7-DOF Humanoid Manipulator

Design and Kinematic Analysis of a Light Weight and High Stiffness Manipulator for Humanoid Robots

Analytical Inverse Kinematics Solver for Anthropomorphic 7-DOF Redundant Manipulators with Human-Like Configuration Constraints

Kinematics Analysis and Simulation of a 6-DOF Humanoid Robot Manipulator

Research on the Motion and Dynamics of Biomimetic Manipulator with Seven Degrees of Freedom

Kinematic Analysis And Mechanical Design Of A Humanoid Manipulator

Inverse Kinematics Solving of a Novel Soft Manipulator with Vision and IMU Data

An Analytical Inverse Kinematics Solution with the Avoidance of Joint Limits, Singularity and the Simulation of 7-DOF Anthropomorphic Manipulators

POE-Based Inverse Kinematics Analysis for a Six-DOF Robotic Manipulator.

Analytical Inverse Kinematic Computation for Anthropomorphic Manipulator Based on Human-Like Motion Optimization and Maximum Reachable Region Optimization.

Development of a redundant anthropomorphic hydraulically actuated manipulator with a roll-pitch-yaw spherical wrist

Kinematic Analysis of A Novel Type of 6-DOF Hybrid Serial-parallel Manipulator

Kinematic Analysis of Seven-Degree-of-freedom Exoskeleton Rehabilitation Manipulator

Analysis of kinematics of a five-axis hybrid manipulator

Kinematics Optimization of a Novel 7-DOF Redundant Manipulator.