Abstract:In this paper, a novel fault location method is proposed for multi-branch distribution network based on traveling wave. The improved complete ensemble empirical mode decomposition with adaptive noise (ICEEMDAN) and Teager energy operator (TEO) is used to detect the arrival time of traveling waves. Firstly, according to the signal processing ability of the ICEEMDAN method, the ICEEMDAN method is used to decompose the sampled signals when the fault occurs, and extract the high-frequency component of the sampled signals. Then, the TEO is used to extract the abrupt characteristics of high-frequency modal components. And the first maximum mutation point of the signal is regarded as the initial fault traveling wave signal. In addition, considering the transmission characteristic of fault traveling wave signal in multi-branch lines of distribution network, the difference value characteristic of branches is defined. And the recognition principle and the fault location method of multi-branch lines are established to realize the accurate location of distribution network line faults. Simulation results show that the proposed ICEEMDAN-TEO method can effectively detect the fault traveling wave signals, and has a better detection performance than CEEMDAN-TEO and HHT methods. The proposed fault location method can effectively locate fault positions and reduce location errors. © 2017 Elsevier Inc. All rights reserved.

Fault Location Method for Distribution Network with Two Opposite Phase Pulse Injection

Novel Fault Locating Method Based on Synchronized Voltage Phasor

Active Fault-Locating Scheme for Hybrid Distribution Line Based on Mutation of Aerial-Mode Injected Pulse

A Two-Terminal Fault Location Algorithm Using Asynchronous Phasors Based on Distributed Parameter Model

Fault Location Algorithm for HV Transmission Lines Immune to Saturation of Current Transformers

Fault Location Method Based on Full Waveform Information for Distribution Networks

A Distributed Fault Location Method For T-Connection Transmission Line

Fault location based on variable mode decomposition and kurtosis calibration in distribution networks

A Novel Single-Ended Fault Location Method for Locating Double-Phase to Earth Faults

A Traveling Wave-Based Fault Location Method Employing VMD-TEO for Distribution Network

Fault Location Method for Distribution Networks Based on Leakage Energy Function

Fault Location Method for Transmission Line Based on Distributed Traveling Wave Detection

Fault Location Method for High‐voltage Direct Current Transmission Line Using Incident Current Travelling Waves

Fault Location Method for HVDC Transmission Lines on the Basis of the Distributed Parameter Model

Fault Location Method in Power Network by Applying Accurate Information of Arrival Time Differences of Modal Traveling Waves

Fault Location in Distribution Networks Using Zero-Mode Traveling Wave Mutation of Reclosing

A Fault Location Method Based on Improved Wavelet Denoising for Open-line Fault in the Low-voltage Distribution Network

Fault Location Method for Distribution Network Using an Additional Inductance Strategy

Fault Location Method for Distribution Network Based on Synchronous Measurement

A novel fault location method based on traveling wave for multi-branch distribution network

Study onFault Location Method Based on Leakage Energy Function