Abstract:The application of Ti6Al 4V in lightweight structures subjected to impact loads necessitates a comprehensive understanding of its dynamic response under high strain rates to ensure the safety and reliability of these components. In this paper, the macroscopic compressive mechanical behavior of Ti 6Al 4V under high strain rates was investigated through the split-Hopkinson pressure bar (SHPB) technique at both room temperature and 200 °C, followed by microstructure analysis of the compressed specimens, carried out employing a combination of optical microscopy (OM) and electron backscatter diffraction (EBSD), and elastic modulus and hardness measurements, performed by a nanoindentation instrument. At room temperature, both the modulus and strain hardening exponent of Ti 6Al4V exhibited an initial increase before the strain rate reached 1000 s -1 , after which they decreased at 3400 s -1 . Meanwhile, the flow stress continued to rise with increasing strain rate. Microscopic observations revealed that twinning played a substantial role in the strain hardening effects. Notably, the basal slip system of the hcp (hexagonal close packed) α phase did not display a more favorable trend, while the c+a type slip systems became more active. Under a strain rate of 5000 s -1 , discontinuous dynamic recrystallization emerged as the dominant mechanism, resulting in an increased frequency of low-angle grain boundaries, as well as a reduction in grain size and dislocation density. These results provide a basis for explaining the mechanical behavior of Ti 6Al 4V under high strain rates and offer insights for the establishment of material models that take into account microstructure deformation mechanisms.

Adiabatic Shearing Behavior of Shock-Prestrained Ti-2Al-9.2Mo-2Fe Alloy at Different Reloading Strain Rates

Instability Analysis and Rate-Dependent Failure Criteria for Adiabatic Shear Band Propagation of Ti-6al-4v

Effect of shock-induced substructure evolution on the dynamic reloading mechanical behavior of Ti-17 alloy

Effect of Grain Size on the Shock-Induced Response and Spall Fracture Behavior of a Metastable Β Titanium Alloy Subjected to Repeated Impact

Effect of High Strain Rate on Adiabatic Shearing of α+β Dual-Phase Ti Alloy

The Effects of Microstructure on the Dynamic Mechanical Response and Adiabatic Shearing Behaviors of a Near-α Ti-6Al-3Nb-2Zr-1Mo Alloy

The Deformation Mechanism and Adiabatic Shearing Behavior of Extruded Mg-8.0Al-0.1Mn Alloy in Different Heat Treated States under High-Speed Impact Load

In-Situ Tensile Deformation Behavior Of As-Built Laser Direct Metal Deposited Ti-6al-4v Alloy At 200 Degrees C

Influence of Phase Stability on Postshock Mechanical Properties and Microstructure Evolution in Ti-17 Alloy

Dynamic Shear Fracture Toughness and Failure Characteristics of Ti–6Al–4V Alloy under High Loading Rates

Multiple Deformation Mechanisms in Adiabatic Shear Bands of a Titanium Alloy during High Strain Rate Deformation

Effect of Prestrain on Microstructure and Mechanical Behavior of Aged Ti–10V–2Fe–3Al Alloy

Dynamic Strain-Rate Effect On Uniaxial Tension Deformation Of Ti5al2.5sn Alpha-Titanium Alloy At Various Temperatures

Analysis of Adiabatic Shearing Phenomenon and Dynamic Mechanical Performance on TA-6 of α-Titanium Alloy

High strain rate mechanical behavior of Ti-6Al-4V with micro–macro correlation under compressive loading

Stable strain hardening behavior of Ti-4Al-5Mo-5V-5Cr-1Nb alloy during plastic deformation

Effect of Strain Rate on the Tension Behavior of Ti–6.6Al–3.3Mo–1.8Zr–0.29Si Alloy at Low Temperatures

Adiabatic shear instability in a titanium alloy: Extreme deformation-induced phase transformation, nanotwinning, and grain refinement

Temperature-Dependent Tension Plastic Deformation and Fracture Behavior of Ti-6.6Al-3.3Mo-1.8Zr-0.29Si Alloy at High Strain Rates

Some Experiments on Adiabatic Shear Failure

Dynamic compressive properties and underlying failure mechanisms of selective laser melted Ti-6Al-4V alloy under high temperature and strain rate conditions