Abstract:Space double-layer cylindrical reticulated shells (SDLCRS) have undergone rapid development in the four three decades. Significantly different from conventional multistory high-rise structures, such structures are very sensitive to vertical actions. As a result, conventional seismic isolation techniques that aim to reduce horizontal seismic actions are notably insufficient for this kind of structure. In this study, a new three-dimensional seismic isolation bearing was developed that can simultaneously reduce the horizontal and vertical seismic responses of an SDLCRS. To examine the actual seismic isolation effectiveness of the three-dimensional seismic isolation bearing and provide important theoretical, technical and experimental support for practical engineering applications, comparative shaking table tests were performed on isolated and non-isolated SDLCRSs with lower supporting structures. The 2013 Lsf ground motion record during Lushan earthquake and the 1954 Taft ground motion record were selected as seismic inputs. The dynamic responses including acceleration, displacement and strain of the SDLCRS under the input ground motions with different amplitudes were obtained using the shaking table tests. In addition, the seismic damage of the isolated and non-isolated structures was examined to determine the acceleration amplification effect of the structures. The effectiveness in acceleration and strain responses demonstrated that the three-dimensional seismic isolation bearing was very useful for horizontal and vertical seismic isolation. Moreover, the maximum displacement responses of the bearing were less than half of the respective design displacements, suggesting that the bearing still had considerable reserve bearing capacity and could significantly improve the safety of an SDLCRS under seismic loads. The bearing developed in this study not only has excellent seismic isolation performance and post earthquake restoration capability but can also be easily installed and maintained. Thus, this bearing holds great promise for engineering applications and is suitable for SDLCRS that require both horizontal and vertical seismic isolation.

Resilient Isolation-Structure Systems with Super-Large Displacement Friction Pendulum Bearings

Performance Analysis and Comparison of Two Base Isolation Systems with Super-Large Displacement Friction Pendulum Bearings

A Direct Displacement-Based Design Procedure for Base-Isolated Building Structures with Lead Rubber Bearings (Lrbs)

Advances and challenges in friction pendulum bearings for seismic isolation systems

Evaluation of isolation performance of, reticulated shell structures with curvature-consistent frictional pendulum isolation system through shaking table tests

Cyclic behavior of an adaptive seismic isolation system combining a double friction pendulum bearing and shape memory alloy cables

Seismic Performance Assessment of a Single-Layer Spherical Lattice Shell Structure with Multifunctional Friction Pendulum Bearings

Shaking table tests on seismic behaviors of a single-layer spherical lattice shell with shape memory alloy-controlled friction pendulum bearings

Mechanical Properties of Innovative Prefabricated Friction Pendulum Bearing with Concrete-Filled Steel Tube System

Seismic protection of a single-layer spherical lattice shell structure using a separated three-dimensional isolation system

Mechanical Properties and Seismic Loss Assessment of Improved Isolation Bearing with Variable Stiffness

Static and dynamic experimental validations of a frictional isolator with improved internal lateral impact behavior

Shaking table tests of base-isolated reinforced concrete frame by double friction pendulum bearings

Full-Scale Tests and Analytical Model of the Teflon-Based Lead Rubber Isolation Bearings

Study on a conical bearing for acceleration-sensitive equipment

Seismic isolation effect of a new type of friction pendulum bearing in high-speed railway girder bridge

Seismic performance of a novel 3D isolation system on continuous bridges

Seismic Isolation Design for Long-span Prestressed Concrete Continuous Girder Bridge

Multiple-performance objective design of isolated large-span structure connecting high-rise buildings

Shaking table test of space double-layer cylindrical reticulated shell with three-dimensional isolation bearing

Analysis and design of double friction pendulum systems for seismic isolation