Abstract:Commercial interest in nanomaterials and their applications lead to the development of many new methods for mass production. Among them, supercritical hydrothermal synthesis (SCHS) is a highly efficient and environmental-friendly technology. In this work, an advanced industrialized device for SCHS was used to verify the synthesis of nano-zirconia particles. The influencing laws and mechanisms of different material parameters (precursor type, precursor concentration, and pH) and process parameters (reaction temperature, reaction pressure, residence time, and Reynolds number) of nano-zirconia synthesis were studied. For the first time, the state changes of zirconium precursors and the precipitation behavior of nano-zirconia particles were in-situ observed by a high-speed camera. Central composite design (CCD) of response surface methodology (RSM) was adopted to investigate interactive effects of reaction temperature (200–420 °C), reactant concentration (0.01–0.6 mol L −1 ), alkali ratio (0–5) and flow rate (3–15 mL min −1 ), with particle size (APS), crystal form ratio (k) and reactant conversion rate (α) serving as response values. The influence of key process parameters follows an order of reaction concentration > reaction temperature > system flow > alkali ratio for APS, alkali ratio > system flow > reaction temperature > reaction concentration for k, and reaction temperature > alkali ratio > system flow > reaction concentration for α, respectively. The optimal process parameters were then obtained and further verified at lab and industrial scale. Zirconia powders with particle sizes of 4.98 nm and 8.74 nm were synthesized, respectively, indicating five hundred times magnification of continuous SCHS of nano zirconia from laboratory to industrialization.

Supercritical Hydrothermal Synthesis of Nano-Zro2: Influence of Technological Parameters and Mechanism

From modification to mechanism: Supercritical hydrothermal synthesis of nano-zirconia

Supercritical hydrothermal synthesis of nano-zinc oxide: Process and mechanism

Supercritical hydrothermal synthesis of nano-ZnO: Effects of key parameters and reaction mechanism

Synthesis, Characterization and Application of Submicron ZrSiO4 Powder Via Sol-Gel-microemulsion-hydrothermal Method

Study on the Synthesis of Nano Zinc Oxide Particles under Supercritical Hydrothermal Conditions

Fabrication of Submicron Tetragonal Polycrystalline ZrO2 by the Transformation of Micro Monoclinic ZrO2 under High Pressure

Hydrothermal Synthesis and Characterization of Zirconia Nanocrystallites

Synthesis of Single-Crystalline Pb(Zr0.52Ti0.48)O-3 Nanocrystals by Hydrothermal Method

Response surface study on continuous supercritical hydrothermal synthesis of nano-zirconia: Scale-up from laboratory to industrialization

Poly(vinyl Pyrrolidone)-Assisted Hydrothermal Synthesis of Pb(Zr0.52Ti0.48)O3 Nanocrystals

Controlled Synthesis of 1D ZnO Nanostructures Via Hydrothermal Process

Sequential Occurrence of ZnO Nanopaticles, Nanorods, and Nanotips During Hydrothermal Process in a Dilute Aqueous Solution

Preparation of Nano-ZrO2 powder via a microwave-assisted hydrothermal method

Preparation of Zirconia Powders by Sol-gel Process

A Simple and Novel Low-Temperature Hydrothermal Synthesis of ZnO Nanorods

Template-Free Hydrothermal Synthesis of Octahedron-, Diamond-, and Plate-like ZrO2 Mono-Dispersions

Hydrothermal Synthesis of Lead Zirconate Titanate Nearly Free-Standing Nanoparticles in the Size Regime of about 4 Nm

L-Lysine-Assisted Synthesis Of Zro2 Nanocrystals And Their Application In Photocatalysis

Facile Synthesis and Characterization of ZrO₂ Nanoparticles via Modified Co-Precipitation Method

Solvent Effects on the Solvothermal Synthesis of PureMonoclinic and Tetragonal Zirconia Nanoparticles