Abstract:Abstract Steel structures are frequently exposed to high‐cycle loading in which fatigue cracks initiate and propagate in the service life. The development of crack(s) will affect the structural integrity. In extreme cases, e.g., earthquakes and impacts, structures may be overloaded in several cycles or even a single loading cycle with the development of significant plastic deformation and macro cracks. Service loads, e.g., traffic and waves, will afterwards still be experienced in these damaged structures. The aforementioned two types of deformation are currently analyzed using damage and fracture mechanics methods, respectively. The cycle‐by‐cycle calculation and jump strategy relying on the Paris' equation, are employed for the low (including monotonic) and high‐cycle problems, using elastoplastic and linear‐elastic materials, respectively. The two calculation methods were developed independently, which presents a challenge in analyzing overloaded high‐cycle fatigue problems. This paper presents and executes a hybrid analysis using damage and fracture mechanics models for the single‐edge notch bend specimen. Either linear‐elastic or elasto‐plastic materials is employed in finite element simulations. The hybrid analysis with the combination of damage and linear‐elastic fracture mechanics shows the potential of a promising solution for assessing the fatigue behaviour of steel structures experiencing extreme loading and associated stepwise material damage. Some challenges are addressed in the combination of the ductile fracture followed by the high cycle fatigue calculation.

A peridynamic damage-cumulative hybrid model for fatigue cracking

Mechanistic Modeling of Fatigue Crack Growth in Asphalt Fine Aggregate Matrix under Torsional Shear Cyclic Load

A Hybrid Modeling Method of Fatigue Crack Growth for Gas Turbine Blades under Combined High and Low Cycle Fatigue Loadings

A Kinetics-Based Model of Fatigue Crack Growth Rate in Bituminous Material

A State-Based Peridynamic Flexural Fatigue Model for Contact and Bending Conditions

A peridynamic damage-cumulative model for rolling contact fatigue

Prediction of Low Cycle Fatigue Crack Growth under Mixed-mode Loading Conditions Using Cohesive Zone Models

A Discrete Element Model for Damage and Fatigue Crack Growth of Quasi-Brittle Materials

Hybrid fatigue crack propagation analysis using damage and fracture mechanics methods

Isodamage Curve-Based Fatigue Damage Accumulation Model Considering the Exhaustion of Static Toughness

Rate dependent cohesive zone model for fatigue crack growth

Application of a Cohesive Zone Model for Simulating Fatigue Crack Growth from Moderate to High <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" id="M1"><mml:mi mathvariant="normal">Δ</mml:mi><mml:mi>K</mml:mi></mml:math> Levels of Inconel 718

Cyclic cohesive zone model damage parameter acquisition for fatigue crack growth considering crack closure effect

Damage Evolution Modeling for Steel Structures Subjected to Combined High Cycle Fatigue and High-Intensity Dynamic Loadings

Physical description and model validation of welded joint fatigue damage evolution

Application Of A Cohesive Zone Model For Simulating Fatigue Crack Growth From Moderate To High Delta K Levels Of Inconel 718

An engineering model of fatigue crack growth under variable amplitude loading

A damage model for matrix cracks in composite laminates under fatigue loading based on continuum damage mechanics

A continuum damage model for prediction of crack initiation life of pitting corrosion and fatigue

A Non-Ordinary State-Based Peridynamic Model for Creep–fatigue Behavior and Damage Evolution

Life Prediction of Corrosion-Fatigue Based on a New Crack Growth Rate Model with Damage and the Extended Finite Element Method