Abstract:NiAl intermetallics is considered to be a potential high temperature structural material based on a high melting point, low density, high thermal conductivity, excellent oxidation and hot-corrosion resistance at elevated temperatures [1–4], but its high temperature strength is insufficient for the majority of actual applications. The tensile ductility and fracture toughness at ambient temperatures are often also unsatisfactory [5, 6]. The solid solution strengthening, precipitation strengthening, directional solidification and single crystal technique have been explored to improve its high temperature strength. Although significant progress has been achieved, the ambient tensile ductility and fracture toughness often deteriorate as a result. On the other hand, the ductility and toughness can also be improved by microalloying, macroalloying and plastic secondary phase additions, but this is at the expense of the strength [4–7]. In other words, it is very difficult to compromise its high temperature strength and ambient temperature ductility. This severely restricts its operating temperature and deteriorates its machinability. It is significant to explore novel fabricaturing techniques for NiAl intermetallic alloy to improve its comprehensive mechanical properties. Preparing intermetallic matrix composite is an effective method to produce engineering NiAl intermetallic alloy and to improve its high temperature strength and retain ambient temperature ductility simultaneously [8, 9]. Good ductility can be obtained through adequately alloying the intermetallic matrix while the strength is improved with the reinforcements. The casting, combustion synthesis, powder metallurgy and mechanical alloying are major methods for preparing NiAl intermetallic matrix composites. Nevertheless, in many cases, the mechanical bonding due to no interfacial reaction, or the brittle reactive products existing at the interface between matrix and reinforcement due to excessive interfacial reaction often result in weak interfacial bonding so that whole properties

Excellent Strength-Ductility Synergy of NiAl-based Composites Achieved by a 3-Dimensional Network Structure

Direct Laser Fabricated in Situ TiC Particulate Reinforced Ni30Al20Fe Intermetallic Matrix Composite

Improving the ductility of high-strength multiphase NiAl alloys by introducing multiscale high-entropy phases and martensitic transformation

Fabrication and mechanical properties of the NiAl sheet with a 3-dimensional network structure prepared by Ni nets and Al foils

Investigating the Influence of Al Contents on Microstructure and Mechanical Properties of Ni 3 Al Superalloy Fabricated by Twin Wire‐Based Direct Arc Energy Deposition

Mechanical properties of Al-Si matrix composites synergistically reinforced by high-entropy alloy and SiC nanoparticles

Microstructure Evolution and Mechanical Properties of Ni3al/Al2o3 Composite During Self-Propagation High-Temperature Synthesis and Hot Extrusion

Hierarchically heterogeneous strategy for Ti 2 AlC/TiAl composite with superior mechanical properties

Enhanced Combination of Strength and Ductility in Ultrafine-Grained Aluminum Composites Reinforced with High Content Intragranular Nanoparticles

Enhanced mechanical properties of a novel heat resistant Al-based composite reinforced by the combination of nano-aluminides and submicron TiN particles

Stiff, strong and ductile heterostructured aluminum composites reinforced with oriented nanoplatelets

Development of a novel Ni-based composite via in-situ reinforcement units formed by high-density hierarchical nanoscale precipitates

Achieving superior strength-ductility synergy by constructing network microstructure in Ti-based high-entropy alloy matrix composites

Microstructures and properties of in situ synthesis Ni/Ni-Al multilayer composites

Design of a Thermally Stable Heat-Resistant (Al2O3+Al3Ti)/Al Composite with Excellent High-Temperature Mechanical Properties: Multimechanism Synergistic Strengthening Strategy

Increasing the ductility of heat-resistant AlNp/Al composites by submicron Al2O3 particles

Gaining strength-ductility combination in Al matrix composites with in-situ synthesized three-dimensional nanocarbon network

Achieving high strength and ductility in high-entropy alloy particle reinforced Al matrix composites with proper proportion of layered structures

An Al-Al interpenetrating-phase composite by 3D printing and hot extrusion

Microstructure evolution, mechanical properties, and strengthening mechanisms of heat-resistant Al-based composite reinforced by a combination of AlN and TiN particles

Architectural and component design of CNTs/Al hierarchical composite for enhanced mechanical/thermal properties