Abstract:In this paper, a new method of calculating the diffraction efficiency for diffraction / refraction infrared hybrid system is given. By using this method, an automatic measurement system is designed. This system covers the wavelength range of 1 similar to 3 mu m, 3 similar to 5 mu m and 8 similar to 12 mu m. We use a blackbody as the energy source, put the lens which is to be measured above a computer controlled turntable in order to gain different results in different filed of view. We also have several relay lenses to cope with long or negative focal length. We use two types of detectors to deal with wavelength range of 1 similar to 3 mu m and 3 similar to 12 mu m. Both the detector and preamplifier are assembled together so we can easily change them for different wavelength ranges. To improve the accuracy of the measurements, a new theory of measuring the main energy is developed to minimize the negative impacts of other diffraction orders and the environment. We use an adjustable slit cooperating with a two-axis stage to scan the focal point and by adjusting the width of the slit we can reduce the energy of other diffraction orders and the environment that may come into our detector. During the experiment process we can manually control the slit and two-axis stage to improve the efficiency and use our computer program to improve the accuracy. The energy modulator and lock-in amplifier also help to improve the accuracy of our system. We designed two standard lenses for the 3 similar to 5 mu m wavelength range. Both of them are made of the same material, have the same focal length of 200mm and their shape is almost the same. The only difference between them is that one of them is pure refraction piece which acts as a reference and the other one has a diffraction surface to achromatic aberration. The result fits our theory well and the possible causes of the differences are discussed. This system has a practical meaning in the quality evaluating of infrared hybrid system.

Study on Single-Terminal Transmission Visibility Meter Based on Reflector

Small angle measurement method based on the total internal multi-reflection

A New Method Of Calculating The Diffraction Efficiency For Diffraction/Refraction Infrared Hybrid System

Intelligent Measuring System for Performance Parameters of Laser Range Finder

Design of Portable Visibility Meter

Increasing the Operating Distance of a Phase-Shift Laser Range-Finding System by Using an Active Reflector

An Integrated High-Performance Ratio-Metric Wavelength Measurement Device on Glass

All-fiber Velocity Measurement System Based on Receiving Diffuse Reflection by Multiple Fibers

Measurement system for diffuse reflectivity based on LabVIEW

An Improved Measurement Technique for Atmospheric Attenuation of Laser Transmittance

A Method Combining Mobile Transmissometer and Lidar for High Precision Measurement of Visibility

Novel Optical Measurement System For Laser Transmittance And Reflectance Of Materials

THE PERFORMANCE EVALUATION AND DATA CORRECTION OF THE FORWARD SCATTERING VISIBILITY SENSOR

High-Resolution Atmospheric-Transmission Measurement with A Laser Heterodyne Radiometer

Influence of Stray Light in Low Blind Zone on Signal Quality of Lidar System

A Portable Retroreflection Coefficient Detector

RESEARCH ON THE TRANSIENT RADIANT HEAT FLOW METER

Experimental Investigation of Laser Transmission at 1.06μm in Horizontal Atmosphere under Fine and Haze-Fog Conditions of Summer

Experimental Verification of Transmitting-Receiving Registration Method with High Precision Used in Multi-Beam Lidar

The Design of Enhanced Multi-Reflection Cells for Broadband Sources in Mobile Trace Gas Sensing Instrument

Measurement range expansion of single-beam Laser Doppler velocimeter based on a focusing transmitter