Abstract:Abstract Transistors on aligned semiconducting carbon nanotubes (A-CNTs) have been considered a promising substitute for mainstream Si transistors to extend integrated circuit (IC) technology owing to their potential advantages of easy miniaturization and high energy efficiency, but whether A-CNT FETs can be scalably fabricated with ultrascaled whole dimensions while maintaining high performance remains questionable. Here, we explore the whole size scaling down potential of A-CNT transistors and demonstrate the possibility of implementing such small-geometry transistors in ultra-large-scale ICs that consist of billions of transistors. A-CNT transistors with a contacted gate pitch (CGP) of 175 nm have been achieved by simultaneously scaling the gate length and the contact length, and exhibit an on-current of 2.24 mA/μm and a peak transconductance of 1.64 mS/μm, surpassing silicon 45 nm node transistors in terms of both size and electronic performance. A static random-access memory (SRAM) cell has been built using six A-CNT transistors in an area of 0.967 μm2, which is comparable to the commercial silicon 90 nm technology node and is the smallest SRAM cell based on non-Si semiconductors. Furthermore, a full-contact structure is introduced between the metal and A-CNTs to achieve a contact resistance as low as 90 Ω·μm and to reduce the dependence on the contact length. A-CNT transistors downsized to a CGP of 55 nm (corresponding to the silicon 10 nm technology node) have been demonstrated to outperform 10 nm Si MOS transistors in terms of carrier mobility and Fermi velocity, indicating the tremendous potential of A-CNT transistors in high-performance digital ICs of sub 10 nm nodes.

Large-scale Integrated Circuits Simulation Based on CNT-FET Model

Carbon Nanotube Materials for Future Integrated Circuit Applications

Monolithic Three‐dimensional Integration of Aligned Carbon Nanotube Transistors for High‐performance Integrated Circuits

Carbon‐Based Interconnects for RF Nanoelectronics

Circuit Modeling and Performance Analysis of Multi-Walled Carbon Nanotube Interconnects

Progress on a Carbon Nanotube Field-Effect Transistor Integrated Circuit: State of the Art, Challenges, and Evolution

Aligned carbon nanotube integrated circuit downsizing toward a sub-10 nm node

A Compact Model of Carbon Nanotube Field-Effect Transistors for Various Sizes with Bipolar Characteristics

Artificial Neural Network Based CNTFETs Modeling

Full-Custom 90 nm CNTFET Process Design Kit: Characterization, Modeling, and Implementation

Device and Circuit-Level Performance of Carbon Nanotube Field-Effect Transistor with Benchmarking Against A Nano-Mosfet

High-Performance Complementary Transistors and Medium-Scale Integrated Circuits Based on Carbon Nanotube Thin Films.

Compact Modeling of Carbon Nanotube Thin Film Transistors for Flexible Circuit Design.

Scaling of N-Type Field-Effect Transistors Based on Aligned Carbon Nanotube Arrays

Deep-Submicrometer Complementary Metal-Oxide-Semiconductor Transistors Based on Carbon Nanotube Films

Wafer-scale carbon-based CMOS PDK compatible with silicon-based VLSI design flow

Modeling And Simulation Of Carbon Nanotube-Semiconductor Heterojunction Vertical Field Effect Transistors

A Compact Model for Nanowire Tunneling-FETs

Highly Uniform Carbon Nanotube Field-Effect Transistors and Medium Scale Integrated Circuits.

A physical design tool for carbon nanotube field-effect transistor circuits

A Compact Virtual-Source Model for Carbon Nanotube Field-Effect Transistors in the Sub-10-nm Regime - Part II Extrinsic Elements, Performance Assessment, and Design Optimization