Abstract:Journal of Circuits, Systems and Computers, Ahead of Print. This paper presents a novel footless single clock-phase three-stage comparator with internally generated regenerative voltage signals for low kickback noise and high speed. The preamplifier and clocked latch topology of dynamic comparators are considered in this brief. The proposed design has been compared by analyzing and optimizing three state-of-the-art comparator designs: Modified StrongARM, Miyahara's and Three-Stage. These designs are simulated using the 40[math]nm CMOS technology process. The area of the proposed comparator is 28.025[math][math]m2. When simulated in the SPICE-based simulator HSPICE, under typical performance conditions of 0.9[math]V supply voltage, 25∘C, 1 GHz operational frequency, typical process corner (tt), and 1[math]mV differential voltage, the proposed comparator produces the best post-layout results, with a minimum delay of 59.9[math]ps from meta-stability analysis, energy per comparison of 0.175[math]pJ/comparison and a kickback noise of 44.55 [math]A. The proposed design also shows a significant improvement in the measured performance parameters over the other state-of-the-art dynamic comparators that have been discussed in this brief. The obtained results show that the proposed comparator is appropriate for 12-bit Successive Approximation Resister Analog-to-Digital Converters (SAR-ADCs) in IoT applications.

A Three-Stage Comparator with High Speed and Low Power

A Threshold Control Technique for CMOS Comparator Design

A CMOS High-Speed Multistage Preamplifier for Comparator Design

A Low-Power Low-Noise Dynamic Comparator with Latch-Embedding Floating Amplifier

High Speed, Low Power Dynamic Comparator with Dynamic Biasing in Pre-amplifier Phase

A Low Power Continuous Time Hysteresis Comparator with an Average Current Consumption of 614na at 1.5 Voltage

An Energy-Efficient Comparator with Dynamic Floating Inverter Pre-Amplifier

Design and Analysis of Low Power and High-Speed Dynamic Comparator with Transconductance Enhanced in Latching Stage for ADC Application

A high-efficient dynamic comparator with low-offset in weak inversion region

A Three-Stage Dynamic Comparator for SAR ADC Optimized for Reduced Kickback Noise and Ultra-Low Delay

A 0.41ns CLK-OUT Delay, 0.22mvrms Input-Referred Noise CMOS Integration Dynamic Comparator with Flipping Capacitor for Charge Reuse

A high‐speed and power efficient CMOS dynamic comparator for data converter circuits

Design Of Three Stage Comparator Using 90nm Technology

A 0.2-Mv 20-Mhz 600-Μw Comparator

A 0.9 V high‐speed dynamic bias latch‐type comparator employing a voltage‐controlled delay line

A 0.69-Noise-efficiency-factor 4 X-Current-reuse Dynamic Comparator with A Stacking FIA

Cascode Cross-Coupled Stage High-Speed Dynamic Comparator in 65 nm CMOS

A low power and high speed 45 nm CMOS dynamic comparator with low offset

A Robust High-Speed And Low-Power Cmos Current Comparator Circuit

Speed enhancement and kickback noise reduction in single-stage latched comparator improved for high-speed and low-noise analogue-to-digital converters

New high-performance CMOS current comparator circuit