Abstract:Journal of Circuits, Systems and Computers, Ahead of Print. This paper presents a novel footless single clock-phase three-stage comparator with internally generated regenerative voltage signals for low kickback noise and high speed. The preamplifier and clocked latch topology of dynamic comparators are considered in this brief. The proposed design has been compared by analyzing and optimizing three state-of-the-art comparator designs: Modified StrongARM, Miyahara's and Three-Stage. These designs are simulated using the 40[math]nm CMOS technology process. The area of the proposed comparator is 28.025[math][math]m2. When simulated in the SPICE-based simulator HSPICE, under typical performance conditions of 0.9[math]V supply voltage, 25∘C, 1 GHz operational frequency, typical process corner (tt), and 1[math]mV differential voltage, the proposed comparator produces the best post-layout results, with a minimum delay of 59.9[math]ps from meta-stability analysis, energy per comparison of 0.175[math]pJ/comparison and a kickback noise of 44.55 [math]A. The proposed design also shows a significant improvement in the measured performance parameters over the other state-of-the-art dynamic comparators that have been discussed in this brief. The obtained results show that the proposed comparator is appropriate for 12-bit Successive Approximation Resister Analog-to-Digital Converters (SAR-ADCs) in IoT applications.

Cascode Cross-Coupled Stage High-Speed Dynamic Comparator in 65 nm CMOS

High-speed cascode cross-coupled CMOS dynamic comparator with auxiliary inverter pair

A Threshold Control Technique for CMOS Comparator Design

A high‐speed and power efficient CMOS dynamic comparator for data converter circuits

A CMOS High-Speed Multistage Preamplifier for Comparator Design

A low power and high speed 45 nm CMOS dynamic comparator with low offset

Design and Analysis of Low Power and High-Speed Dynamic Comparator with Transconductance Enhanced in Latching Stage for ADC Application

A Three-Stage Comparator with High Speed and Low Power

A precise dynamic CMOS comparator

A 288-Μw 6-Ghz Hybrid Dynamic Comparator with 54-Ps Delay in 40-Nm CMOS

A Dynamic CMOS Comparator with High Precision and Resolution

Speed enhancement and kickback noise reduction in single-stage latched comparator improved for high-speed and low-noise analogue-to-digital converters

A Three-Stage Dynamic Comparator for SAR ADC Optimized for Reduced Kickback Noise and Ultra-Low Delay

A Low Noise High Speed Dynamic Comparator Insensitive to PVT and Common-mode Input

A 0.9 V high‐speed dynamic bias latch‐type comparator employing a voltage‐controlled delay line

Design Of Three Stage Comparator Using 90nm Technology

A 0.41ns CLK-OUT Delay, 0.22mvrms Input-Referred Noise CMOS Integration Dynamic Comparator with Flipping Capacitor for Charge Reuse

Low‐voltage Bulk‐driven High‐speed Comparator for ADCs

Design Optimization of CMOS CDC Comparators

A 0.2-Mv 20-Mhz 600-Μw Comparator

High Speed, Low Power Dynamic Comparator with Dynamic Biasing in Pre-amplifier Phase