Abstract:Networks-on-chip (NoCs) are scaled out to build large-scale multi-chip networks to meet the growing demand for computing. However, the traditional router-based NoC architecture has significant limitations: 1) The overhead of routers is high, especially for long-distance traffic that traverses numerous chips and hops; 2) On/off-chip traffic is mixed up, so the local NoC performance is dragged down by the cross-chip traffic; 3) The routing design of intra/inter-chip networks is also entangled. The alternative router-less solution based on isolated multi-ring (IMR) can address some of these issues; however, the complete lack of routers leads to wiring overhead and limited scalability thus not suitable for large-scale multi-chip networks. Therefore, we are motivated to design a new network architecture that can reduce router/wiring overhead, isolate on/off-chip traffic, and decouple inter/intra-chip routing design by combining the advantages of both routers and router-less rings. In this paper, we propose Ring Road, in which high-speed isolated multi-rings are integrated with compact routers, thus achieving flexible traffic delivery with less router usage and overhead. A polar-coordinate-based description is presented to describe the topology, and corresponding deadlock-free routing algorithms are discussed. As a standalone NoC, Ring Road is low-cost, low-latency, and high-performance. It can also be scaled out into multi-chip networks without redesigning the on-chip routing regardless of inter-chip topology. With low-cost isolated ring channels, no matter how heavy the cross-chip traffic is, the local NoC performance remains consistent. Circuit implementation and post-synthesis analysis show that Ring Road achieves $1.7\sim 2\times$ bandwidth-per-area and $1.6\sim 1.9\times$ bandwidth-per-power compared with the traditional mesh router. Cycle-accurate simulation shows that Ring Road achieves better performance and energy efficiency at various workloads and configurations.

A Fully Asynchronous QDI Mesh Router Based on 28nm Standard Cells

Mass Message Transmission Aware Buffer-Less Packet-Circuit Switching Router for 3D NoC

Efficient Transistor-Level QDI Asynchronous Switch for Neuromorphic Systems.

On a Scalable, Non-Blocking Optical Router for Photonic Networks-on-Chip Designs

A novel micro-ring-based 4 × 4 non-blocking silicon optical router

A Generic Optical Router Design for Photonic Network-on-Chips

Wavelength-selective 4 × 4 Nonblocking Silicon Optical Router for Networks-on-chip.

A 2d Mesh Noc With Self-Configurable And Shared-Fifos Routers

Lightweight Network-on-chip Router on Research and Design

Lateral Asynchronous and Vertical Synchronous 3D Network on Chip with Double Pumped Vertical Links.

Design and Development of Low Power Clock and Data Recovery Circuit for Asynchronous Network on Chips

Ring Road: A Scalable Polar-Coordinate-based 2D Network-on-Chip Architecture

A Tightly Coupled Network-on-Chip Router Architecture

Design and Implementation of Single-Buffered Routers

A Hybrid Router Combining Circuit Switching and Packet Switching with Virtual Channels for On-Chip Networks

A Low-Cost and High-Throughput Virtual-Channel Router with Arbitration Optimization

Monolithically Integrated 8 × 8 Transmitter-Router Based on Tunable V-Cavity Laser Array and Cyclic Arrayed Waveguide Grating Router

Virtual Channel Number Effect and Clock Ratio Effect for a Network-on-chip

Design and Implementation of Multi-Mode Routers for Large-Scale Inter-Core Networks

Low-power and high-performance adaptive routing in on-chip networks

A Dual-Port Access Structure of 3D Mesh-Based NoC