Abstract:Networks-on-chip (NoCs) are scaled out to build large-scale multi-chip networks to meet the growing demand for computing. However, the traditional router-based NoC architecture has significant limitations: 1) The overhead of routers is high, especially for long-distance traffic that traverses numerous chips and hops; 2) On/off-chip traffic is mixed up, so the local NoC performance is dragged down by the cross-chip traffic; 3) The routing design of intra/inter-chip networks is also entangled. The alternative router-less solution based on isolated multi-ring (IMR) can address some of these issues; however, the complete lack of routers leads to wiring overhead and limited scalability thus not suitable for large-scale multi-chip networks. Therefore, we are motivated to design a new network architecture that can reduce router/wiring overhead, isolate on/off-chip traffic, and decouple inter/intra-chip routing design by combining the advantages of both routers and router-less rings. In this paper, we propose Ring Road, in which high-speed isolated multi-rings are integrated with compact routers, thus achieving flexible traffic delivery with less router usage and overhead. A polar-coordinate-based description is presented to describe the topology, and corresponding deadlock-free routing algorithms are discussed. As a standalone NoC, Ring Road is low-cost, low-latency, and high-performance. It can also be scaled out into multi-chip networks without redesigning the on-chip routing regardless of inter-chip topology. With low-cost isolated ring channels, no matter how heavy the cross-chip traffic is, the local NoC performance remains consistent. Circuit implementation and post-synthesis analysis show that Ring Road achieves $1.7\sim 2\times$ bandwidth-per-area and $1.6\sim 1.9\times$ bandwidth-per-power compared with the traditional mesh router. Cycle-accurate simulation shows that Ring Road achieves better performance and energy efficiency at various workloads and configurations.

Design and Implementation of Multi-Mode Routers for Large-Scale Inter-Core Networks

A 2-Mw Multi-mode Router Design with Dual-core Processor in 65 Nm LL CMOS for Inter-silicon Communication

A Generic Optical Router Design for Photonic Network-on-Chips

IMR: High-Performance Low-Cost Multi-Ring NoCs

On a Scalable, Non-Blocking Optical Router for Photonic Networks-on-Chip Designs

Four-Port Silicon Multi-Wavelength Optical Router for Photonic Networks-on-Chip

A novel micro-ring-based 4 × 4 non-blocking silicon optical router

Ring Road: A Scalable Polar-Coordinate-based 2D Network-on-Chip Architecture

Wavelength-selective 4 × 4 Nonblocking Silicon Optical Router for Networks-on-chip.

A Hybrid Router Combining Circuit Switching and Packet Switching with Virtual Channels for On-Chip Networks

On-Chip Router Elements Based on Silicon Hybrid Plasmonic Waveguide

Multi-mapping Meshes: A New Communicating Fabric for Networks-on-Chip

Critical-Path Driven Routers for On-Chip Networks

Lightweight Network-on-chip Router on Research and Design

Four-port mode-selective silicon optical router for on-chip optical interconnect

A Fully Asynchronous QDI Mesh Router Based on 28nm Standard Cells

A Hybrid-Mode On-Chip Router for the Large-Scale FPGA-Based Neuromorphic Platform

Designing Scalable Routers With A New Switching Architecture

A Tightly Coupled Network-on-Chip Router Architecture

MRouter: The Router Based on Memory Centric Mechanism

Maximizing the Inner Resilience of a Network-on-Chip through Router Controllers Design