Abstract:Effective and accurate measurement of cutting temperature of the tool tip is of great significance in the machining fields. However, the current measuring methods, including the embedded thermocouple and thermography, have some inevitable shortages. For example, the hole for displacing the embedded thermocouple damages the cutting edge strength, and the chip blocks the view contact between the tool tip and the thermal imager. This paper proposes two feed-forward multi-layered perceptron artificial neural network (ANN) models with Levenberg-Marquardt backpropagation training algorithms to determine the tool steady-state tip temperature for the dry turning process. The first model (called TC_ANN) calculates the steady-state tip temperature based on the temperatures of four specific points on the rake face. The second model (called TP_ANN) predicts the steady-state tip temperature via the cutting parameters. First, a fully thermo-mechanical finite element simulation model of the dry turning process is established. Next, the simulation model is repeated with different combinations of cutting parameters for sufficient times. Then, collection of the steady-state temperatures of the tool tip and these four specific points, and corresponding cutting parameters for each simulation model is conducted as the dataset to train these two ANN models. Based on the evaluation results with experimental data, the simulation model is validated to be reliable, and the mean relative errors of the tip temperature calculation for the actual turning process via TC_ANN and TP_ANN are 3.25% and 4.03%, respectively. Finally, the influences of cutting parameters on the tool tip temperature are investigated based on TP_ANN. It is found that the cutting speed and depth of cut have the most and least significant effects on the tip temperature, respectively, and the feed rate has almost the same influence as the depth of cut.

Optimized Method for Thermal Tracking in 3D NoC Systems by Using ANN

Thermal camera networks for large datacenters using real-time thermal monitoring mechanism

Power-and thermal-aware mapping for NoC under latency constraint

A Nearest-Neighbor-Based Thermal Sensor Allocation and Temperature Reconstruction Method for 3-D NoC-Based Multicore Systems

TTNNM: Thermal- and Traffic-Aware Neural Network Mapping on 3D-Noc-based Accelerator

Countering Variations and Thermal Effects for Accurate Optical Neural Networks.

LSTM-based Temperature Prediction and Hotspot Tracking for Thermal-aware 3D NoC System.

An Artificial Neural Networks based Temperature Prediction Framework for Network-on-Chip based Multicore Platform

Accurate Runtime Thermal Prediction Scheme For 3d Noc Systems With Noisy Thermal Sensors

Report on power, thermal and reliability prediction for 3D Networks-on-Chip

Thermal Sensor Placement and Thermal Reconstruction under Gaussian and Non-Gaussian Sensor Noises for 3-D NoC

An optimized mapping algorithm based on simulated annealing for regular NoC architecture

An Artificial Neural Network Model for Electro-Thermal Effect Affected Hot Carrier Injection Reliability in 14-nm FinFETs

Dynamic Thermal Management for 3-D ICs with Time-Dependent Power Map Using Microchannel Cooling and Machine Learning

Kalman Predictor-Based Proactive Dynamic Thermal Management for 3D NoC Systems with Noisy Thermal Sensors

Temperature-aware Task Scheduling Heuristics on Network-on-Chips

Thermal-aware application mapping using genetic and fuzzy logic techniques for minimizing temperature in three-dimensional network-on-chip

Determination of tool tip steady-state temperature in dry turning process based on artificial neural network

Thermal-Aware Placement And Routing For 3d Optical Networks-On-Chips

Thermal-Aware Test Scheduling For Noc-Based 3d Integrated Circuits

Temperature-Aware On-Chip Networks