Abstract:In this article, an in-line Mach-Zehnder interferometer (ILMZI)-based temperature sensor of a sandwich-like composite structure was proposed and experimentally demonstrated. Using simple cleaving and splicing operations, ILMZI was formed by compactly sandwiching a section of four-hole microstructure optical fiber (FHMF) of ultrashort length between two segments of multimode fibers and single-mode fibers in turn. Due to the large thermo-optic coefficient difference between the silica and air modes in FHMF, the sensor achieves a comparable sensitivity of 67.29 pm/degrees C over a wide dynamic range of 20.8 degrees C-100.4 degrees C. Because the sensing area length is only a few hundred micrometers, the long-term stability and anti-interference of the sensor are greatly enhanced. In addition, the large airhole design confines the propagation mode in silica medium by total internal reflection, reducing the interaction between the liquid sample and the sensing element, making the sensor inert to the ambient refractive index. The maximum response deviation of the sensor under microvibration disturbances is 3.51 x 10(-4) nm/degrees C, and the maximum cross-sensitivity under strain disturbances is only 0.0018 degrees C/mu epsilon. The proposed sensor is excellent in performance, easy in fabrication, simple in structure, and low in cost, which can be expected to be used in practical temperature sensing applications without any additional packaging.

Ultrasensitive Interferometers Based on Zigzag-Shaped Tapered Optical Microfibers Operating at the Dispersion Turning Point.

Sensitivity-Enhanced RI Sensor Based on Cascaded Microfiber Mach–Zehnder Interferometers Near the Dispersion Turning Point With Vernier Effect

Modal Interferometer Based on A C-Shaped Ultrathin Fiber Taper for High-Sensitivity Refractive Index Measurement

A Reliable Anti-Interference Temperature Sensor Based on a Four-Hole Microstructure Optical Fiber Mach-Zehnder Interferometer.

Improvement on Refractive Index Sensing by Exploiting the Tapered Two-Mode Fibers

Advances in dispersion turning point enhanced ultrasensitive optical fiber refractive index sensors

Ultra-high Sensitivity Optical Sensors Based on Cascaded Two Fabry-Perot Interferometers

High Sensitivity Strain Sensor Based on a Novel Offset-Core Single Micro-Tapered Fiber-Optic Mach-Zehnder Interferometer

High Sensitivity Refractive Index Sensor based on a Tapered Single-mode-Multimode-Single-mode Fiber Structure

Single S-Tapered Fiber Mach-Zehnder Interferometers

A High‐sensitivity Refractometer Based on Etched Thin‐core Fiber Modal Interferometer

Improved optical fiber Mach-Zehnder high-sensitivity refractive index sensor

High-Sensitivity Interferometric Fiber Sensor with Non-Adiabatic Structure Mode

Highly Improved Refractive Index Sensitivity in Fiber Mach-Zehnder Interferometer Based on Two Tapers

Slight-Offset Tapered Multimode Fiber with High Sensitivity for Low Refractive Index Range

Refractive Index Sensing Based on Mach-Zehnder Interferometer Formed by Three Cascaded Single-Mode Fiber Tapers

Demonstration of a Refractometric Sensor Based on an Optical Micro-Fiber Three-Beam Interferometer.

Highly Sensitive Refractive Index Sensor Based on Novel Mach–Zehnder Interferometer with Multimode Fiber–thin Core Fiber–multimode Fiber Structure

Tapered Fiber-Optic Mach-Zehnder Interferometer for Ultra-High Sensitivity Measurement of Refractive Index

Ultra-small Fiber Taper Fabry-Perot Modal Interferometer

The Theoretical Research and Experimental Fabrication of the Dispersion Turning Point Sensors Realized in Tapered-Microfibers