Abstract:To improve the poor membrane-forming ability of polymer containing sterically-protected organic cations with the excellent alkaline stability, a series of robust and crosslinked poly(2,6-dimethyl-1,4-phenylene oxide)s (PPO) anion exchange membranes (AEMs) with bulky and chemically stable imidazolium cations was prepared by quaternization with C1,C3,C4-substituted imidazole and crosslinking reaction via "thiol-ene" chemistry. Compared to the uncrosslinked counterpart, the crosslinked AEMs showed excellent film-forming properties with the highest of tensile strength of 53.2 MPa, probably owing to the increased entanglement interactions in polymer chains that may in turn result in the controlled the water uptake and dimensional stability of the AEMs. Moreover, by using two different crosslinkers, water uptake of the resulting AEMs could be effectively tuned. The crosslinked AEM had a water uptake of 12.8 wt% with the ion exchange capacity (IEC) of 1.27 meq./g when using a hydrophilic dithiol as the crosslinker, which was almost twice than that for the membrane with hydrophobic crosslinker AEM (water uptake was 6.6 wt%, IEC = 1.28 meq./g). The higher water uptake further contributed to high ionic transport with bromide conductivity of 11.2 mS/cm at 20 degrees C in water and 24.8 mS/cm at 80 degrees C. The excellent alkaline stability of these materials was demonstrated by the fact that, more than 90.4% of bromide conductivity and 60.5% of tensile strength was retained after 1000 h immersion in 1 M NaOH at 80 degrees C, due to the presence of crosslinked networks and alkali-resistant sterically-protected imidazolium. Furthermore, we compared the AEM fuel cell performance and durability of the membrane electrode assembly (MEA) using the crosslinked and uncrosslinked bulky imidazolium-functionalized PPO copolymers as ionomers in catalyst layers. A higher peak power density of 200 mW/cm(2) at a current density of 475 mA/cm(2) and improved short-term durability (20.5 h) under a constant current density of 200 mA/cm(2) at 60 degrees C were obtained for the membrane electrode assembly with the crosslinked ionomer. These results suggest that crosslinking of anion conductive materials with stable sterically-protected organic cations is a facile and effective strategy to prepare the robust and alkaline stable AEMs for high-performance alkaline fuel cells.

Tunable OH– Transport and Alkaline Stability by Imidazolium-Based Groups of Poly(2,6-dimethyl-1,4-phenylene Oxide) Anion Exchange Membranes: A Molecular Dynamics Simulation

Facile Preparation of Novel Cardo Poly(oxindolebiphenylylene) with Pendent Quaternary Ammonium by Superacid-Catalysed Polyhydroxyalkylation Reaction for Anion Exchange Membranes

Quaternized Poly(2,6-Dimethyl-1,4-phenylene Oxide) Anion Exchange Membranes with Pendant Sterically-Protected Imidazoliums for Alkaline Fuel Cells

Enhancement of the Mechanical Properties of Anion Exchange Membranes with Bulky Imidazolium by "Thiol-Ene" Crosslinking

Synthesis and Characterization of Main-Chain Type Polyimidazolium-Based Alkaline Anion Exchange Membranes

Anion Exchange Membranes of Bis-Imidazolium Cation Crosslinked Poly(2,6-Dimethyl-1,4- Phenylene Oxide) with Enhanced Alkaline Stability

A general strategy to enhance the alkaline stability of anion exchange membranes

Side-chain Manipulation of Poly (phenylene Oxide) Based Anion Exchange Membrane: Alkoxyl Extender Integrated with Flexible Spacer

Alkaline Stable Imidazolium-Based Ionomers Containing Poly(arylene Ether Sulfone) Side Chains for Alkaline Anion Exchange Membranes

Imidazolium Functionalized Block Copolymer Anion Exchange Membrane with Enhanced Hydroxide Conductivity and Alkaline Stability Via Tailoring Side Chains

Alkali Resistant Anion Exchange Membranes Based on Saturated Heterocyclic Quaternary Ammonium Cations Functionalized Poly(2,6-dimethyl-1,4-phenylene oxide)s

Benzimidazolium functionalized polysulfone-based anion exchange membranes with improved alkaline stability

A stable anion exchange membrane based on imidazolium salt for alkaline fuel cell

Anion Exchange Membranes with Well-Developed Conductive Channels: Effect of the Functional Groups

Improvement the hydroxide conductivity and alkaline stability simultaneously of anion exchange membranes by changing quaternary ammonium and imidazole contents

Influences of Non-Ionic Branches on the Properties of the Anion Exchange Membranes Based on Imidazolium Functionalized Poly (2, 6-Dimethyl-1, 4-Phenylene Oxide)

Design of pendent imidazolium side chain with flexible ether-containing spacer for alkaline anion exchange membrane

Enhancing Anion Conduction Stability of Quaternized Poly(phenylene) Oxide‐based Anion Exchange Membranes with Ionic Liquids Modified Carbon Nanomaterials

1,2,3-Triazolium-based Poly(2,6-Dimethyl Phenylene Oxide) Copolymers As Anion Exchange Membranes

Understanding of Imidazolium Group Hydration and Polymer Structure for Hydroxide Anion Conduction in Hydrated Imidazolium-G-ppo Membrane by Molecular Dynamics Simulations

Preparation and properties of PPO-based anion exchange membranes with flexible side chains for fuel cells