Abstract:To improve the poor membrane-forming ability of polymer containing sterically-protected organic cations with the excellent alkaline stability, a series of robust and crosslinked poly(2,6-dimethyl-1,4-phenylene oxide)s (PPO) anion exchange membranes (AEMs) with bulky and chemically stable imidazolium cations was prepared by quaternization with C1,C3,C4-substituted imidazole and crosslinking reaction via "thiol-ene" chemistry. Compared to the uncrosslinked counterpart, the crosslinked AEMs showed excellent film-forming properties with the highest of tensile strength of 53.2 MPa, probably owing to the increased entanglement interactions in polymer chains that may in turn result in the controlled the water uptake and dimensional stability of the AEMs. Moreover, by using two different crosslinkers, water uptake of the resulting AEMs could be effectively tuned. The crosslinked AEM had a water uptake of 12.8 wt% with the ion exchange capacity (IEC) of 1.27 meq./g when using a hydrophilic dithiol as the crosslinker, which was almost twice than that for the membrane with hydrophobic crosslinker AEM (water uptake was 6.6 wt%, IEC = 1.28 meq./g). The higher water uptake further contributed to high ionic transport with bromide conductivity of 11.2 mS/cm at 20 degrees C in water and 24.8 mS/cm at 80 degrees C. The excellent alkaline stability of these materials was demonstrated by the fact that, more than 90.4% of bromide conductivity and 60.5% of tensile strength was retained after 1000 h immersion in 1 M NaOH at 80 degrees C, due to the presence of crosslinked networks and alkali-resistant sterically-protected imidazolium. Furthermore, we compared the AEM fuel cell performance and durability of the membrane electrode assembly (MEA) using the crosslinked and uncrosslinked bulky imidazolium-functionalized PPO copolymers as ionomers in catalyst layers. A higher peak power density of 200 mW/cm(2) at a current density of 475 mA/cm(2) and improved short-term durability (20.5 h) under a constant current density of 200 mA/cm(2) at 60 degrees C were obtained for the membrane electrode assembly with the crosslinked ionomer. These results suggest that crosslinking of anion conductive materials with stable sterically-protected organic cations is a facile and effective strategy to prepare the robust and alkaline stable AEMs for high-performance alkaline fuel cells.

Anion Exchange Membranes of Bis-Imidazolium Cation Crosslinked Poly(2,6-Dimethyl-1,4- Phenylene Oxide) with Enhanced Alkaline Stability

Enhancement of the Mechanical Properties of Anion Exchange Membranes with Bulky Imidazolium by "Thiol-Ene" Crosslinking

Olefin Metathesis-Crosslinked, Bulky Imidazolium-Based Anion Exchange Membranes with Excellent Base Stability and Mechanical Properties

Azide-Assisted Self-Crosslinking of Highly Ion Conductive Anion Exchange Membranes

Preparation and Investigation of Various Imidazolium-Functionalized Poly(2,6-Dimethyl-1,4-phenylene Oxide) Anion Exchange Membranes

Alkali Resistant Anion Exchange Membranes Based on Saturated Heterocyclic Quaternary Ammonium Cations Functionalized Poly(2,6-dimethyl-1,4-phenylene oxide)s

Novel Cross-Linked Anion Exchange Membranes with Diamines As Ionic Exchange Functional Groups and Crosslinking Groups

Diamine Crossklinked Anion Exchange Membranes Based on Poly(vinyl Benzyl Methylpyrrolidinium)

High conductivity and alkali-resistant stability of imidazole side chain crosslinked anion exchange membrane

Influences of Non-Ionic Branches on the Properties of the Anion Exchange Membranes Based on Imidazolium Functionalized Poly (2, 6-Dimethyl-1, 4-Phenylene Oxide)

Poly(phenylene Oxide)-Based Anion Exchange Membranes Having Linear Cross-Linkers or Star Cross-Linkers

Ionic crosslinking of imidazolium functionalized poly(aryl ether ketone) by sulfonated poly(ether ether ketone) for anion exchange membranes

Flexibly Crosslinked and Post-Morpholinium-functionalized Poly(2,6-Dimethyl-1,4-phenylene Oxide) Anion Exchange Membranes

Crosslinked anion exchange membranes prepared from highly reactive polyethylene and polypropylene intermediates

Tunable OH– Transport and Alkaline Stability by Imidazolium-Based Groups of Poly(2,6-dimethyl-1,4-phenylene Oxide) Anion Exchange Membranes: A Molecular Dynamics Simulation

Bis-imidazolium Functionalized Self-Crosslinking Block Polynorbornene Anion Exchange Membrane

Mechanically Robust Anion Exchange Membranes Via Long Hydrophilic Cross-Linkers

Interpenetrating Anion Exchange Membranes Using Poly(1-Vinylimidazole) As Bifunctional Crosslinker for Fuel Cells

Imidazolium Functionalized Block Copolymer Anion Exchange Membrane with Enhanced Hydroxide Conductivity and Alkaline Stability Via Tailoring Side Chains

A novel anion exchange membrane based on silicone/polyphenylene oxide with excellent ionic conductivity for AEMFC

Elastic Long-Chain Multication Cross-Linked Anion Exchange Membranes