Abstract:To improve the poor membrane-forming ability of polymer containing sterically-protected organic cations with the excellent alkaline stability, a series of robust and crosslinked poly(2,6-dimethyl-1,4-phenylene oxide)s (PPO) anion exchange membranes (AEMs) with bulky and chemically stable imidazolium cations was prepared by quaternization with C1,C3,C4-substituted imidazole and crosslinking reaction via "thiol-ene" chemistry. Compared to the uncrosslinked counterpart, the crosslinked AEMs showed excellent film-forming properties with the highest of tensile strength of 53.2 MPa, probably owing to the increased entanglement interactions in polymer chains that may in turn result in the controlled the water uptake and dimensional stability of the AEMs. Moreover, by using two different crosslinkers, water uptake of the resulting AEMs could be effectively tuned. The crosslinked AEM had a water uptake of 12.8 wt% with the ion exchange capacity (IEC) of 1.27 meq./g when using a hydrophilic dithiol as the crosslinker, which was almost twice than that for the membrane with hydrophobic crosslinker AEM (water uptake was 6.6 wt%, IEC = 1.28 meq./g). The higher water uptake further contributed to high ionic transport with bromide conductivity of 11.2 mS/cm at 20 degrees C in water and 24.8 mS/cm at 80 degrees C. The excellent alkaline stability of these materials was demonstrated by the fact that, more than 90.4% of bromide conductivity and 60.5% of tensile strength was retained after 1000 h immersion in 1 M NaOH at 80 degrees C, due to the presence of crosslinked networks and alkali-resistant sterically-protected imidazolium. Furthermore, we compared the AEM fuel cell performance and durability of the membrane electrode assembly (MEA) using the crosslinked and uncrosslinked bulky imidazolium-functionalized PPO copolymers as ionomers in catalyst layers. A higher peak power density of 200 mW/cm(2) at a current density of 475 mA/cm(2) and improved short-term durability (20.5 h) under a constant current density of 200 mA/cm(2) at 60 degrees C were obtained for the membrane electrode assembly with the crosslinked ionomer. These results suggest that crosslinking of anion conductive materials with stable sterically-protected organic cations is a facile and effective strategy to prepare the robust and alkaline stable AEMs for high-performance alkaline fuel cells.

Optimization of the mass ratio of siloxane crosslinkers for poly(2,6-dimethyl-1,4-phenylene oxide) anion exchange membranes to improve acid enrichment by electrodialysis

Exploring the acid enrichment application of piperidinium-functionalized cross-linked poly(2,6-dimethyl-1,4-phenylene oxide) anion exchange membranes in electrodialysis

Advanced Charged Porous Membranes with Ultrahigh Selectivity and Permeability for Acid Recovery

Side Chain Crosslinked Anion Exchange Membrane for Acid Concentration by Electrodialysis

Tuning the Length of Aliphatic Chain Segments in Aromatic Poly(arylene Ether Sulfone) to Tailor the Micro-Structure of Anion-Exchange Membrane for Improved Proton Blocking Performance

Anion Exchange Membranes of Bis-Imidazolium Cation Crosslinked Poly(2,6-Dimethyl-1,4- Phenylene Oxide) with Enhanced Alkaline Stability

Enhancement of the Mechanical Properties of Anion Exchange Membranes with Bulky Imidazolium by "Thiol-Ene" Crosslinking

Enhanced diffusion dialysis performance of cross-linked poly(aryl piperidine) anion exchange membranes by thiol-ene click chemistry for acid recovery

Mixed-charge Poly(2,6-Dimethyl-phenylene Oxide)anion Exchange Membrane for Diffusion Dialysis in Acid Recovery

Azide-Assisted Self-Crosslinking of Highly Ion Conductive Anion Exchange Membranes

Poly(phenylene Oxide)-Based Anion Exchange Membranes Having Linear Cross-Linkers or Star Cross-Linkers

Anion-exchange Membrane with Ion-Nanochannels to Beat Trade-off Between Membrane Conductivity and Acid Blocking Performance for Waste Acid Reclamation

A novel anion exchange membrane based on silicone/polyphenylene oxide with excellent ionic conductivity for AEMFC

Diamine Crossklinked Anion Exchange Membranes Based on Poly(vinyl Benzyl Methylpyrrolidinium)

A Facile Approach to Fabricate Composite Anion Exchange Membranes with Enhanced Ionic Conductivity and Dimensional Stability for Electrodialysis

Enhancing Acid Recovery Efficiency by Implementing Oligomer Ionic Bridge in the Membrane Matrix

Quaternized Poly(2,6-Dimethyl-1,4-phenylene Oxide)s with Zwitterion Groups As Diffusion Dialysis Membranes for Acid Recovery

Preparation of Self-Crosslinking Anion Exchange Membrane with Acid Block Performance from Side-Chain Type Polysulfone

Crosslinked anion exchange membranes prepared from highly reactive polyethylene and polypropylene intermediates

Enhancing Hydroxide Conductivity and Stability of Anion Exchange Membrane by Blending Quaternary Ammonium Functionalized Polymers

Preparation of Acid Block Anion Exchange Membrane with Quaternary Ammonium Groups by Homogeneous Amination for Electrodialysis-Based Acid Enrichment