Abstract:Dimensionality reduction models (DRM) are widely utilized for well-posed inversion of highly heterogeneous aquifer properties. However, these models predominantly rely on predefined aquifer properties, which are often unknown in realistic aquifers; moreover, DRM for fracture network characterization is still lacking. In this study, we develop a novel DRM based on the tracer breakthrough curve (TBC) obtained from cross-hole tracer test. This model enables integrated characterization of fracture networks and prediction of flow and transport in fractured aquifers. Firstly, the relationship between TBC shape and flow and transport in fracture networks is elucidated through 3D-printing physical modeling and numerical simulations. It is observed that in complex fracture networks, flow and transport dominantly occur through a limited number of preferential flow paths under pumping scenarios involving simultaneous injection and extraction. The preferential flow paths remain stable under different pumping rates, with their number aligning with the number of inflection points, including concentration peaks in TBC and evident slowness point during the decline of tracer concentration. Building upon this finding, DRM composed of parallel fractures with the number of fractures equal to the number of inflection points in TBC is constructed. Parallel fractures in DRM represent preferential flow paths for flow and transport within the original fracture network. Parameters including sizes, apertures, and separation of parallel fractures are then inferred by TBC inversion. It is tested by the 3D-printing physical model that under pumping rates differential to that implemented in the tracer test for DRM parameters estimation, the established DRM is capable of predicting the tracer concentration and outflow temperature at the extraction well with a relative error lower than 10%. Moreover, the implementation of proposed DRM concept with synthetic large fracture network demonstrates its genericity for the characterization of fracture networks at field scale. This new DRM concept provides a feasible and effective way for fracture network characterization and flow and transport prediction.

Estimation of the Hydraulic Properties of a Fractured Aquifer Using Numerical Experiments with the Discrete Fracture Network Model

Hybrid Discrete Fracture Network Inversion of Hydraulic Tomography Data From a Fractured‐Porous Field Site

Stochastic Inversion of Three‐Dimensional Discrete Fracture Network Structure with Hydraulic Tomography

Inference of Intermittent Hydraulic Fracture Tip Advancement Through Inversion of Low-Frequency Distributed Acoustic Sensing Data

Characterization of discrete fracture networks with deep-learning based hydrogeophysical inversion

Recent developments, challenges, and future research directions of tomographic characterization of fractured aquifers

Enhancing Understanding of Hydraulic Fracture Tip Advancement through Inversion of Low-Frequency Distributed Acoustic Sensing Data

Comparative Study on Interconnectivity Between Three-Dimensional and Two-Dimensional Discrete Fracture Networks: A Perspective Based on Percolation Theory

Data-driven hydraulic property analysis and prediction of two-dimensional random fracture networks

A Hydraulic Fracture Geometry Inversion Model Based on Distributed-Acoustic-Sensing Data

An IFS-based fractal discrete fracture network for hydraulic fracture behavior of rock mass

An inverse approach integrating flowmeter and pumping test data for three-dimensional aquifer characterization

Numerical Simulation of Unsaturated Flow in Single Fracture Considering the Water Exchange Between Fracture and Matrix

Coupled Hydro-Mechanical XFEM Analysis for Multi-Fracturing Through an Excavation Driven by an Underlying Aquifer: a Forensic Case Study

Coupled Hydrogeophysical Inversion to Identify Non-Gaussian Hydraulic Conductivity Field by Jointly Assimilating Geochemical and Time-Lapse Geophysical Data

Tracer-test-based dimensionality reduction model for characterizing fracture network and predicting flow and transport in fracture aquifer

XFEM Modeling of Hydraulic Fracture in Porous Rocks with Natural Fractures

Potential of Hydraulic Tomography in Identifying Boundary Conditions of Groundwater Basins

Data-Driven Dynamic Inversion Method for Complex Fractures in Unconventional Reservoirs

Thermal Experiments for Fractured Rock Characterization: Theoretical Analysis and Inverse Modeling

Identification of high-permeability and water-rich zones in a fractured karst water source area based on the hydraulic tomography method