Abstract:The propagation process and geometry of hydraulic fractures depend on complex interactions among the induced fractures and the pre-existing rock fabric, the heterogeneous rock properties, and the stress state. Accurate characterization of the resulting complex hydraulic-fracture geometry remains challenging. Fiber-optic-based distributed acoustic sensing (DAS) measurements have been used for monitoring hydraulic fracturing in adjacent treatment wells. DAS requires an optical fiber attached to the wellbore to transmit the laser energy into the reservoir. Each section of the fiber scatters a small portion of the laser energy back to a surface sensing unit, which uses interferometry techniques to determine strain changes along with the fiber. DAS data in offset wells fall in the low-frequency bands, which has been proven to be a powerful attribute for the characterization of the geometry of hydraulic fractures. Numerous recently published field examples demonstrate the potential of low-frequency DAS (LF-DAS) data for the detailed characterization of the hydraulic fracture geometry. Understanding the fracture-induced rock deformation associated with LF-DAS signals would be beneficial for the better interpretation of real-time data. However, interpretation of LF-DAS measurement is challenging due to the complexity of the subsurface conditions, in addition to potential unanticipated completion issues such as perforation failure, stage isolation failure, etc. All current research efforts focus on the qualitative interpretation of field data.In this study, we quantified the hydraulic fracture propagation process and described the fracture geometry by developing a geomechanical forward model and a Green’s function-based inversion model for the LF-DAS data interpretation, substantially enhancing the value of the LF-DAS data in the process. The work has a significant transformative potential, involving a tool package with developed forward and inversion models that can provide crucial insights for the optimization of hydraulic-fracturing treatments and reservoir development. Methodology The tool package can be used directly in the field to interpret LF-DAS data and monitor hydraulic fracture propagation. Raw data from the field measurement can be automatically processed. The geomechanics forward model we developed can quantify and analyze the strain-rate response from the LF-DAS measurements based on the 3D displacement discontinuity method. Fracture hits are detected by calculating three 1D features along the channel (location) axis, i.e., the maximum strain rate, the summation of strain rates, and the summation of strain-rate amplitudes. Channels with fracture hits usually exhibit significant peak values of these three features. We proposed general guide-lines for fracture-hit detection based on the quantitative analysis of strain/strain-rate responses during the multistage fracturing treatment. The details of the forward model can be found in Liu et al. (SPE 202482, 204457, AMRA-2020-1426). Additionally, we developed a novel Green’s function-based inversion model to qualify fracture width and height based on the determined fracture hits. The strain field that is estimated from the integration of the strain rates measured by the LF-DAS data along the offset monitoring well is related to the fracture widths through a geomechanics Green’s function. The resulting linear system of equations is solved by the least-square method. Details can be found in Liu et al. (SPE 204158, 205379, 204225).

Recent developments, challenges, and future research directions of tomographic characterization of fractured aquifers

Hybrid Discrete Fracture Network Inversion of Hydraulic Tomography Data From a Fractured‐Porous Field Site

Stochastic Inversion of Three‐Dimensional Discrete Fracture Network Structure with Hydraulic Tomography

Estimation of the Hydraulic Properties of a Fractured Aquifer Using Numerical Experiments with the Discrete Fracture Network Model

An inverse approach integrating flowmeter and pumping test data for three-dimensional aquifer characterization

Fracture Network Characterization in Reservoirs by Joint Inversion of Microseismicity and Thermal Breakthrough Data: Method Development and Verification

Sequential Approach to Joint Flow‐seismic Inversion for Improved Characterization of Fractured Media

Inference of Intermittent Hydraulic Fracture Tip Advancement Through Inversion of Low-Frequency Distributed Acoustic Sensing Data

Enhancing Understanding of Hydraulic Fracture Tip Advancement through Inversion of Low-Frequency Distributed Acoustic Sensing Data

Sequential geophysical and flow inversion to characterize fracture networks in subsurface systems

Laboratory and field studies of preferential flow dynamics in unsaturated fractured porous media

Joint Flow Seismic Inversion for Characterizing Fractured Reservoirs: Theoretical Approach and Numerical Modeling

Tuning Fractures with Dynamic Data

Data-Driven Dynamic Inversion Method for Complex Fractures in Unconventional Reservoirs

Mapping Conduits in Two-Dimensional Heterogeneous Karst Aquifers Using Hydraulic Tomography

A Hydraulic Fracture Geometry Inversion Model Based on Distributed-Acoustic-Sensing Data

Application of Electrical Resistivity Tomography for Investigating the Internal Structure and Estimating the Hydraulic Conductivity of in Situ Single Fractures

Fracture Hits and Hydraulic-Fracture Geometry Characterization Using Low-Frequency Distributed Acoustic Sensing Strain Data

Analogue laboratory experiments of preferential flow dynamics in porous fractured media: Importance of fracture intersections and porous matrix imbibition processes

Characterization of discrete fracture networks with deep-learning based hydrogeophysical inversion

Hydraulic Conductivity Estimation Using Tomographic Ground Penetrating Radar Data Within a Sampling‐Based Bayesian Inversion Approach