Abstract:Summary Natural fracture systems comprise numerous small features and relatively few large ones. At field scale, it is impractical to treat all fractures explicitly. We represent the largest fractures using an embedded discrete fracture model (EDFM) and account for smaller ones using a dual-porosity, dual-permeability (DPDK) idealized representation of the fracture network. The hybrid EDFM + DPDK approach uses consistent discretization schemes and efficiently simulates realistic field cases. Further speedup can be obtained using aggregation-based upscaling. Capabilities to visualize and post-process simulation results facilitate understanding for effective management of fractured reservoirs. The proposed approach embeds large discrete fractures as EDFM within a DPDK grid (which contains both matrix and idealized fracture continua for smaller fractures) and captures all connections among the triple media. In contrast with existing EDFM formulations, we account for discrete fracture spacing within each matrix cell via a new matrix-fracture transfer term and use consistent assumptions for classical EDFM and DPDK calculations. In addition, the workflow enables coarse EDFM representations using flow-based cell-aggregation upscaling for computational efficiency. Using a synthetic case, we show that the proposed EDFM + DPDK approach provides a close match of simulation results from a reference model that represents all fractures explicitly, while providing runtime speedup. It is also more accurate than previous standard EDFM and DPDK models. We demonstrate that the matrix-fracture transfer function agrees with flow-based upscaling of high-resolution fracture models. Next, the automated workflow is applied to a waterflooding study for a giant carbonate reservoir, with an ensemble of stochastic fracture realizations. The overall workflow provides the computational efficiency needed for performance forecasts in practical field studies, and the 3D visualization allows for the derivation of insights into recovery mechanisms. Finally, we apply a finite-volume tracer-based flux post-processing scheme on simulation results to analyze production allocation and sweep for understanding expected waterflood performance.

Hybrid Discrete Fracture Network Inversion of Hydraulic Tomography Data From a Fractured‐Porous Field Site

Estimation of the Hydraulic Properties of a Fractured Aquifer Using Numerical Experiments with the Discrete Fracture Network Model

Stochastic Inversion of Three‐Dimensional Discrete Fracture Network Structure with Hydraulic Tomography

Recent developments, challenges, and future research directions of tomographic characterization of fractured aquifers

Inference of Intermittent Hydraulic Fracture Tip Advancement Through Inversion of Low-Frequency Distributed Acoustic Sensing Data

Enhancing Understanding of Hydraulic Fracture Tip Advancement through Inversion of Low-Frequency Distributed Acoustic Sensing Data

Coupled Hydrogeophysical Inversion of DNAPL Source Zone Architecture and Permeability Field in a 3D Heterogeneous Sandbox by Assimilation Time-Lapse Cross-Borehole Electrical Resistivity Data Via Ensemble Kalman Filtering

A Hydraulic Fracture Geometry Inversion Model Based on Distributed-Acoustic-Sensing Data

Thermal Experiments for Fractured Rock Characterization: Theoretical Analysis and Inverse Modeling

Characterization of discrete fracture networks with deep-learning based hydrogeophysical inversion

XFEM Modeling of Hydraulic Fracture in Porous Rocks with Natural Fractures

An inverse approach integrating flowmeter and pumping test data for three-dimensional aquifer characterization

Data-Driven Dynamic Inversion Method for Complex Fractures in Unconventional Reservoirs

A Hybrid Embedded Discrete Fracture Model and Dual-Porosity, Dual-Permeability Workflow for Hierarchical Treatment of Fractures in Practical Field Studies

Inversion of Fracture Parameters from Tiltmeter Measurements During Hydraulic Fracturing

Laboratory and field studies of preferential flow dynamics in unsaturated fractured porous media

Sequential geophysical and flow inversion to characterize fracture networks in subsurface systems

Structure-coupled joint inversion of geophysical and hydrological data

Laboratory experiments and dual‐domain modeling of infiltration dynamics in partially saturated fractured porous media

Hybrid-Dimensional Finite Volume Discretizations for Fractured Porous Media

Preferential Pathways Inversion From Cross‐Borehole Electrical Data