Abstract:In order to overcome the trade-off between the strength and electrical conductivity of aluminum alloy conductors, the new Al-Ce-Sc, Al-Ce-Y, Al-Ce-Zr and Al-Ce-Sc-Y alloys were prepared by die casting, high temperature homogenization treatment, hot extrusion and cold drawing. Adding Sc and Y eliminated the dendrite segregation of the as-cast Al-0.2Ce alloy and promoted the formation of equiaxed grains with the average grain size of 142.5 pin. The Al-0.2Ce-0.2Sc-0.1Y alloy inherited the great tensile properties of Al-0.2Ce-0.25c alloy and the high electrical conductivity of Al-0.2Ce-0.1Y alloy simultaneously. After cold drawing and annealing at 200 degrees C for 5 h, the ultimate tensile strength of Al-0.2Ce-0.2Sc-0.1Y alloy reached 200 MPa and 198 MPa, the elongation reached 6.8 % and 8.5 %, and the electrical conductivity reached 61.01 % and 61.77 %, respectively. The main second phase of Al-0.2Ce-0.25c-0.1Y alloy after hot extrusion were Al13Fe3Ce containing a few Y and Si atoms. The larger size and proportion of the second phase greatly reduced the concentration of solute Fe and Si atoms and the addition of Y significantly decreased the density of defects after cold drawing compared to Al-0.2Ce-0.2Sc alloy, which improved electrical conductivity of the alloy. Furthermore, the dispersed and coherent nano-size Al3Sc precipitions of Al-0.2Ce-0.25c-0.1Y alloy greatly improved strength, elongation and heat resistance. Compared with Al-0.2Ce-0.25c alloy, the lower density of dislocation, stacking fault and subgrain boundary and the larger size of Al3Sc precipitions with enrichment of Y atoms enable the Al-0.2Ce-0.25c-0.1Y alloy to maintain high strength, elongation and electrical conductivity after annealing. (C) 2020 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Microstructure and Mechanical Properties of High Performance Die Cast Al-8Ce-3Y Aluminum Alloy Containing Al4(Ce,Y) Phase

Solid Solution Strengthening Mechanism in High Pressure Die Casting Al–Ce–Mg Alloys

Effect of Fe, Mn, Ce on the Microstructure and Mechanical Properties of Al-Mg and Al-Mg-Si Die Casting Alloys

Enhanced ductility in high-pressure die casting Mg-4Ce-xAl-0.5Mn alloys via modifying second phase

Effect of Ti on Microstructure and Mechanical Properties of Die-Cast Al-Mg-Zn-Si Alloy

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Enhanced load transfer and ductility in Al–9Ce alloy through heterogeneous lamellar microstructure design by cold rolling and annealing

Microstructure and properties of novel Al-Ce-Sc, Al-Ce-Y, Al-Ce-Zr and Al-Ce-Sc-Y alloy conductors processed by die casting, hot C extrusion and cold drawing

Microscopic mechanism of mechanical property improvement of the casted Al-7Si-0.4Mg-0.3Y alloy

A high performance Mg-Al-Ca alloy processed by high pressure die casting: Microstructure, mechanical properties and thermal conductivity

Microstructure design to achieve optimal strength, thermal stability, and electrical conductivity of Al-7.5wt.%Y alloy

A novel die-casting Mg alloy with superior performance: Study of microstructure and mechanical behavior

Microstructures and Mechanical Properties of an Ultrathin Wall High-Pressure Die Casting Mg-8Zn-8Al (wt%) Alloy

The characterization of Fe-rich phases in a high-pressure die cast hypoeutectic aluminum-silicon alloy

Effect of Ce Content on the Microstructure and Mechanical Properties of Squeeze-Cast Al–5Mg-2.2Si-0.6Mn Alloys

The effects of substitution of yttrium for Ce-rich mischmetal on the mechanical properties and thermal conductivity of mg–4Al–4Zn–4RE alloy

Microstructure evolution and performances of Al-0.7Mg-0.6Si-0.2Ce-X (X Sc, Y and Zr) alloys with high strength and high electrical conductivity

A Study on High Strength, High Plasticity, Non-Heat Treated Die-Cast Aluminum Alloy

Influence of Introducing Zr, Ti, Nb and Ce Elements on Externally Solidified Crystals and Mechanical Properties of High-Pressure Die-Casting Al–Si Alloy

Effect of Solidification Sequence on the Microstructure and Mechanical Properties of Die-Cast Al–11Si–2Cu–Fe Alloy

Microstructure, Mechanical, and Corrosion Properties of Cast Heat-Resistant Al–4Zn–4Mg–4Cu–Zr–Y(Er) Alloy