Abstract:The oxidation of bond coat (BC) and interdiffusion between BC layer and superalloys were two mechanisms that contribute to the degradation of thermal barrier coating system (TBCs). The oxidation and interdiffusion of TBCs on single-crystal superalloys were comparatively studied in this work at 950 °C, 1050 °C and 1100 °C over a duration of 1500 h. The results indicated that the thickness of the thermally grown oxide (TGO) progressively increased with the oxidation time and temperature, following a parabolic law. The discontinuous TGO gradually developed into a double-layer structure: the upper layer was a mixed oxide layer, while the lower layer predominantly comprises an Al 2 O 3 layer. Moreover, an interdiffusion zone (IDZ) is formed at the interface between the BC layer and the substrate, with its thickness increasing in response to both temperature and oxidation time. The Cr-rich phases appeared in the IDZ, where Al initially diffused from the BC layer to the substrate, followed by a reverse diffusion process. Simultaneously, Ni and refractory elements diffused from the substrate into IDZ, resulting in the precipitation of the topologically close-packed (TCP) phases and the formation of a secondary reaction zone (SRZ). It has further been shown that Cr-rich phases further diffused into SRZ. Higher oxidation temperatures accelerated the growth of the SRZ and facilitated the transformation of the TCP phases from a blocky to a needle-like morphology. Ultimately, the continuous growth of IDZ and SRZ led to the evolution of the substrate from a monocrystalline to a polycrystalline structure. This study provides valuable data on the microstructural evolution of TBCs and the assessment of their service life.

Failure Process Observation and Failure Mechanism of Ni‐Coated TC4 Alloy by Gradually Changed Curvature Bending Method

Stability of NiCrAlY coating/titanium alloy system under pure thermal exposure

Interdiffusion mechanism at the interface between TiAl alloy and NiCoCrAlY bond coating

Isothermal Diffusion Behavior and Surface Performance of Cu/Ni Coating on TC4 Alloy

Comparative study of temperature-dependent oxidation and interdiffusion behavior on NiCoCrAlYHf-coated nickel-based single-crystal superalloys

Interface Microstructure Regulation of Mg/Ti Bimetals by Thermal Diffusion Treatment of Ni-coated TC4 Alloy

Enhancing mechanism of TC4 high-cycle fatigue performance by the introduction of hard nitride mono-and multilayer coatings

Experimental Investigation on High-Temperature Fatigue and Fracture Properties at the Interface Between Thermal Barrier Coatings (tbcs) and Nickel Based Superalloy Substrate

Mechanical Properties and Fracture Toughness of Multilayer Hard Coatings Using Nanoindentation

Fabrication and Performance of TiN/TiAlN Nanometer Modulated Coatings

Interface Feature via Key Factor on Adhesion of CrN Multilayer and Alloy Substrate

Failure of Electron Beam Physical Vapor Deposited Thermal Barrier Coatings System under Cyclic Thermo-Mechanical Loading with a Thermal Gradient

Effect of vacuum heat treatment on NiCrAlY coating/titanium alloy substrate system

Interfacial failure induced by dynamic evolutional stress of NiCoCrAlY-4YSZ TBCs during gradient thermal cycling: Effect of 4YSZ top coat thickness

TiNbN Hard Coating Deposited at Varied Substrate Temperature by Cathodic Arc: Tribological Performance under Simulated Cutting Conditions

The effect of nickel coating on the mechanical properties and failure modes of continuous carbon fiber reinforced aluminum matrix composites

Temperature Dependence of the Tensile and Thermal Fatigue Cracking Properties of Laser-Deposited Cobalt-Based Coatings for Brake Disc Application

Pt-modification on the thermal cycling behavior of NiCoCrAlYTa coating: a case study

On the Thermal Shock Resistance and Failure Mechanism of the Pt-Modified Aluminide Bond Coating

Effect of V and Cr transition layers on microstructure and mechanical properties of Ni-based coating on titanium alloy fabricated by laser cladding

Preparation of NiTi-Cr3C2/Nano-TiC Coating and Its Properties