Abstract:Ultra-high performance concrete (UHPC) tends to crack and flake at high temperature, which causes the structure to lose its overall stability and collapse, posing a serious threat to people's lives and property safety. In this study, by selecting the cementitious material and the high-temperature resistant aggregate, a new type of high-temperature resistant ultra-high performance concrete (HTR-UHPC) was successfully developed. The high temperature resistance tests of HTR-UHPC were systematically carried out at 5 different temperatures (20 °C, 250 °C, 500 °C, 750 °C, 1000 °C). The compressive and axial tensile properties of the specimens were investigated after high temperatures, and the compressive and tensile stress–strain curves were obtained. High-temperature products and internal structures were tested by scanning electron microscopy (SEM) and X-ray diffractometry (XRD), respectively, and the microscopic mechanisms were revealed. The results showed that the mechanical properties of the HTR-UHPC had been significantly improved after heating at 500 °C, 750 °C, and 1000 °C. When heated to 500 °C, the compressive and tensile strength of HTR-UHPC retained 106 and 88% of the unheated status, respectively. While the structure of traditional UHPC was damaged, the compressive and tensile strength retained only 90 and 76%. Moreover, when heated to 750 °C, the HTR-UHPC still maintained structural integrity. The residual compressive and tensile strength could still reach 115.83 and 6.17 MPa. During the hydration process, the HTR-UHPC did not generate calcium hydroxide, and the failure stress caused by high-temperature dehydration was small. At the same time, the ability of late crystal transition to reduce strength was suppressed by the addition of mineral admixtures, which enabled the formation of cracks and pores to be effectively suppressed. The stability and mechanical properties of the structure were maintained. Overall, these findings offer valuable insights into the influence of cementitious material system and high-temperature resistant aggregate on the mechanical properties of HTR-UHPC.

Experimental Investigation of Triaxial Strength of Ultra-High Performance Concrete after Exposure to Elevated Temperature

Experimental study on dynamic behavior of concrete at elevated temperatures

EXPERIMENTAL RESEARCH ON IMPACT BEHAVIOR OF CONCRETE-FILLED STEEL TUBE AT ELEVATED TEMPERATURES

Compressive Behavior and Strength Prediction of Ultra-High Performance Concrete Confined by Normal and High Strength Steel Hoops

Uniaxial compression performance and stress–strain constitutive model of the aluminate cement-based UHPC after high temperature

Triaxial strength and failure criterion of ultra-high performance concrete

Microstructure and mechanical behaviour of 3D printed ultra-high performance concrete after elevated temperatures

Blast resistance of hybrid steel and polypropylene fibre reinforced ultra-high performance concrete after exposure to elevated temperatures

Flexural Behavior of Ultra-High-Performance Fiber-Reinforced Concrete Beams after Exposure to High Temperatures

Transport Properties and Resistance Improvement of Ultra-High Performance Concrete (UHPC) after Exposure to Elevated Temperatures

Study of Ultra-High Performance Concrete Mechanical Behavior under High Temperatures

Study on Micro-mesoscale Characterization and Impact Load Mechanical Properties of Ultra-High-Performance Concrete After Sustained Elevated Temperature

Thermal and Mechanical Properties of Ultrahigh Toughness Cementitious Composite with Hybrid PVA and Steel Fibers at Elevated Temperatures

Study on preparation and mechanical properties of a new type of high-temperature resistant ultra-high performance concrete

Insight into the Mechanical Performance of the UHPC Repaired Cementitious Composite System after Exposure to High Temperatures

High temperature and freeze-thaw study of strengthened concrete with ultra-high-performance concrete

Experimental study on shear performance of ultra-high-performance concrete beams at elevated temperatures

Research on mechanical properties of ultra-high performance fiber reinforced cement-based composite after elevated temperature

Mechanical and Thermal Properties of UHPC Exposed to High-Temperature Thermal Cycling

Effect of Temperature on Thermal Properties of Ultrahigh-Performance Concrete

Study on the Dynamic Mechanical Properties of Ultrahigh-Performance Concrete under Triaxial Constraints