Abstract:In the present work, a novel Ni-Cu composite interlayer was prepared on the surface of A356 aluminum alloy solid insert using the chemical nickel-plating and electro-coppering technology, in order to restrain the generation of brittle phases and enhance the shear strength of A356 aluminum/AZ91D magnesium bimetal manufactured using a compound casting. The effect of the Ni-Cu composite interlayer on the microstructure, mechanical properties and corrosion resistance of the bimetal was studied. The results show that the Ni-Cu composite interlayer effectively restrained the generation of the brittle and hard Al-Mg intermetallic compounds (IMCs). The interface layer of the A356/AZ91D bimetal without Ni-Cu composite interlayer was composed of Al3Mg2, Al12Mg17, δ-Mg and Mg2Si phases, while the interfacial reactants of the A356/AZ91D bimetal with Ni-Cu composite interlayer were mainly Al3Ni, Ni (Cu), Cu (Ni), Mg2Cu and Al7Cu3Mg6 phases. With the application of the Ni-Cu composite interlayer, the thickness of the interface of the A356/AZ91D bimetal remarkably decreased from 1400 μm of the sample without Ni-Cu composite interlayer to 40 μm. The shear strength of the A356/AZ91D bimetal using Ni-Cu composite interlayer increased by 20.3% compared with that of the bimetal without Ni-Cu composite interlayer. The fractures of the A356/AZ91D bimetals with and without Ni-Cu composite interlayers belonged to a brittle rupture mode. The breakage of the bimetal with Ni-Cu composite interlayer mainly took place between the Ni-Cu layer and AZ91D matrix, while the rupture of the A356/AZ91D bimetal without Ni-Cu composite interlayer was located in the interface layer. The Cu(Ni) and Ni(Cu) layers had a lower nano-hardness than the Al-Mg IMCs, and the elasticity modulus for the Cu(Ni), Ni(Cu) and Al3Ni phases were higher compared to those of the Al-Mg IMCs. The results of corrosion test exhibited that the Ni-Cu composite interlayer had little influence on the corrosion resistance of the A356/AZ91D bimetal.

Investigation of Cu Interlayer on Joint Formation of Ti/Mg Bimetal Fabricated by Liquid–Solid Compound Casting Process

Research on Be/CuCrZr Bonding by Hot Isostatic Pressing at Intermediate Temperature

Effects of Zn Interlayer on Microstructures and Mechanical Properties of TC4/AZ91D Bimetal via Solid–Liquid Compound Casting Process

Microstructural and mechanical characterization of Al/Cu interface in a bimetallic composite produced by compound casting

Effect of Hot-Dipped Tin Coating Treatment on Metallurgical Bonds Between AZ91D and Cu by Composite Casting

Influence of Ni‐Coating Thickness on Interface Microstructure and Mechanical Properties of Mg/Ti Bimetal via Compound Casting

An Investigation into Interface Formation and Mechanical Properties of Aluminum–copper Bimetal by Squeeze Casting

Effects of Melt-to-Solid Volume Ratio and Pouring Temperature on Microstructures and Mechanical Properties of Cu/Al Bimetals in Compound Casting Process

The Effect of the Cu Interlayer on the Interfacial Microstructure and Mechanical Properties of Al/Fe Bimetal by Compound Casting

Microstructure, mechanical properties and corrosion resistance of A356 aluminum/AZ91D magnesium bimetal prepared by a compound casting combined with a novel Ni-Cu composite interlayer

Effects of Interlayer Thickness on Interfacial Microstructure and Joint Performance of Transient Liquid Phase Bonded TC4 Titanium Alloy

Effect of Multi-component Alloy Interlayer on Interfacial Microstructure and Shear Strength of Titanium/Bronze Bimetal

Interfacial layer regulation and its effect on mechanical properties of Ti6Al4V titanium alloy and T2 copper dissimilar joints by cold metal transfer welding

Influence of Cu Coating Thickness on Interfacial Reactions in Laser Welding-Brazing of Mg to Ti

Interface Microstructure Regulation of Mg/Ti Bimetals by Thermal Diffusion Treatment of Ni-coated TC4 Alloy

Effect of Cu interlayer with different thickness on microstructure and properties of Al2O3/Kovar joints brazed with Cu–Ti/Cu/BNi-2 composite filler

Microstructure Evolution of Mg/Cu Dissimilar Metal Jointed by Ultrasonic-Induced Transient Liquid Phase Bonding with Zn Interlayer

Dissimilar fabrication of the TC4/Ni60 bimetallic structure by laser melting deposition using a V/Cu transition bilayer

Effects of Different Types of Interlayers on the Interfacial Reaction Mechanism at the Cu Side of Al/Cu Lap Joints Obtained by Laser Welding/Brazing

Microstructural evolution of Cu–Sn–Ni compounds in full intermetallic micro-joint and in situ micro-bending test

Chemically dealloyed Mg–Cu alloy lamina as an interlayer for reinforcing a C/C composite – TC4 alloy vacuum brazed joint