Abstract:Low intrinsic thermal conductivity coefficients (λ) of polyimide (PI) films limit their application in heat-prone flexible electronics. By optimizing the liquid crystal range to fit the curing temperature, novel kinds of intrinsically highly thermally conductive liquid crystalline PI (LC-PI) films are fabricated. When the molar ratio of 4,4′-diaminodiphenyl ether (ODA) to 1, 4-bis(4-aminophenoxy)benzene (TPE-Q) is 1:3 (sample no. IV), liquid crystal range of preLC-PIIV films is 272∼388 °C, including curing temperature of 350 °C. The LC-PIIV films cured in liquid crystal range retain liquid crystal texture to room temperature, and the in-plane λ (λ∥) and through-plane λ (λ⊥) at room temperature reach 2.11 W/(m·K) and 0.32 W/(m·K), respectively, significantly higher than λ∥ (0.77 W/(m·K)) and λ⊥ (0.15 W/(m·K)) of LC-PII films which are cured out of the liquid crystal range. Meanwhile, LC-PIIV films possess excellent mechanical and thermal properties, showing application prospects in high-heating flexible electronics.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.macromol.1c00686?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.macromol.1c00686</a>.S1, experimental section; S1.1, main materials; S1.2, characterizations; S2, supporting results; Figure S1, molecular weight distribution curves of 5 kinds of PAA; Table S1, comparison of characterized number-averaged molecular weight with theoretical values of 5 kinds of PAA; Figure S2, FTIR spectra of 5 kinds of PAA (a), preLC-PI films before curing (b), and preLC-PIIV films after thermal treatment of 250 °C/5 h, 275 °C/5 h, 300 °C/5 h, 325 °C/5 h, and 350 °C/5 h (c); Figure S3, POM images of LC-PII (a), LC-PIII (b), LC-PIIII (c), and LC-PIV (d) films at room temperature; Figure S4, tensile stress–strain curves of LC-PI films; Figure S5, tensile stress–strain curve of N–PI films; and Table S2, thermal characteristic data of LC-PI films (<a class="ext-link" href="/doi/suppl/10.1021/acs.macromol.1c00686/suppl_file/ma1c00686_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Thermally and Mechanically Stable Polyimides as Flexible Substrates for Organic Field-Effect Transistors

High Performance Biomass-Based Polyimides for Flexible Electronic Applications

Thermally Stable Colorless Copolyimides With A Low Dielectric Constant And Dissipation Factor And Their Organic Field-Effect Transistor Applications

Dimensionally Thermally Stable Biomass-Based Polyimides for Flexible Electronic Applications

Highly Thermal Stable Polyimides Applied In Flexible Resistive Memory

Preparation and Properties of High Heat-resistant Polyimide Films for Flexible OLED

Ultra‐highTgand Ultra‐low Coefficient of Thermal Expansion Polyimide Films Based on Hydrogen Bond Interaction

Functionalized Poly(phenylene ether) with high thermal stability as flexible dielectrics and substrates for organic field-effect transistors

High Glass Transition Temperature and Ultra‐low Thermal Expansion Coefficient Polyimide Films Containing Rigid Pyridine and Bisbenzoxazole Units

Large Scale, Flexible Organic Transistor Arrays and Circuits Based on Polyimide Materials

Tuning the Heat Resistance Properties of Polyimides by Intermolecular Interaction Strengthening for Flexible Substrate Application

Interfacial Molecular Screening of Polyimide Dielectric Towards High-Performance Organic Field-Effect Transistors

High-Frequency 5g Substrate: Low Dielectric Biphenyl Polyimide with Low Cte and High Thermal Stability

Thermal Conductive Hybrid Polyimide with Ultrahigh Heat Resistance, Excellent Mechanical Properties and Low Coefficient of Thermal Expansion

Stability Improvement in Flexible Low-Voltage Organic Field-Effect Transistors with Complementary Polymeric Dielectrics

Based on Rigid Xanthone Group and Hydrogen Bonding to Construct Polyimide Films with Low Coefficient of Thermal Expansion, High Temperature Resistance, and Fluorescent Property

Comprehensive Performance of Polyimide Reinforced by Multiple Hydrogen Bonds for Flexible Electronics Application

Near-Zero Thermal Expansion and High Heat-Resistance Polyimide Films Based on a Symmetric and Rigid Pyrazine Structure

Liquid Crystalline Polyimide Films with High Intrinsic Thermal Conductivities and Robust Toughness

High-mobility flexible pentacene-based organic field-effect transistors with PMMA/PVP double gate insulator layers and the investigation on their mechanical flexibility and thermal stability

Synthesis and properties of modified thermoplastic polyimide films with good dielectric properties at high frequency and enhanced thermal stability via incorporation of rigid ester and biphenyl structural units