Abstract:Gel polymer electrolytes (GPEs) for lithium ion batteries (LIBs) have attracted great attention due to their high ionic conductivity and safety, but it is still a great challenge to develop GPEs which can be used at high temperature in specific applications, such as oil drilling, mining, military and aerospace electronics. Cross-linking is one of the efficient methods for enhancing the thermal stabilities of GPEs. In this work, crosslinked gel polymer electrolytes (e-CGPEs) were made by electrospinning and Friedel-Crafts alkylation reaction. First of all, electrospun polymer membranes (e-PMs) were prepared by electrospinning technique with poly(vinylidene fluoride) (PVDF) as the matrix and polystyrene-b-poly(ethylene oxide)-b-polystyrene (PS-PEO-PS) triblock copolymer as the additive. Then the styrene units in e-PMs were crosslinked by Friedel-Crafts alkylation reaction to give electrospun crosslinked polymer membranes (e-CPMs). e-CPMs were activated by absorbing electrolytes to give crosslinked gel polymer electrolytes (e-CGPEs). The effects of PS-PEO-PS content (3%, 5%, 10%, 20%) on the properties of e-CPMs and e-CGPEs were also discussed. The results show that the content of PS-PEO-PS can affect the crystallinity, electrolyte uptake and crosslinked degree of e-CPMs, which may have influences on the ionic conductivity. Owing to the abundant crosslinked networks, high-temperature dimensional stabilities of eCPMs are much better than that of electrospun PVDF membrane and commercial polypropylene (PP) membrane. All e-CPMs show almost no dimensional shrinkage at 160 degrees C, indicating that e-CPMs can be efficient precursors of GPEs used at high temperature. e-CGPEs have better electrochemical performances than the PVDF-based GPE (e-PVDF), due to their high porosity, electrolyte uptake and ionic conductivity. Among all the e-CGPEs, e-CGPE 5% with proper PS-PEO-PS content and crosslinked degree possesses the highest ionic conductivity of 6.52 mS/cm at room temperature. The half-cell assembled by e-CGPE 5% shows a discharge specific capacity of 83.5 mAh/g at 2 C. e-CGPEs also exhibit excellent cycle and rate performances. e-CGPE 5% has a capacity retention of 99.7% after 100 cycles at 0.1 C. All the results suggest that e-CGPEs have potential application value in high-efficiency lithium ion batteries which could be used at high temperature. And this work also provides a new path for the preparation of crosslinked gel polymer electrolytes with high efficiency and good performance.

Electrospun Composite Gel Polymer Electrolytes with High Thermal Conductivity Toward Wide Temperature Lithium Metal Batteries

In Situ High‐performance Gel Polymer Electrolyte with Dual‐reactive Cross‐linking for Lithium Metal Batteries

Quasi-Solid-State Ion-Conducting Arrays Composite Electrolytes with Fast Ion Transport Vertical-Aligned Interfaces for All-Weather Practical Lithium-Metal Batteries

Supramolecular Network Structured Gel Polymer Electrolyte with High Ionic Conductivity for Lithium Metal Batteries

Preparation and Characterization of Electrospinning Crosslinked Gel Polymer Electrolytes

Electrospun gel composite electrolyte of solvent-free SiO 2 nanofluids coupled polyacrylonitrile nanofibers for high-rate lithium-metal batteries

Electro-Spun P(VDF-HFP)/Silica Composite Gel Electrolytes for High-Performance Lithium-Ion Batteries

Deformable and Flexible Electrospun Nanofiber-Supported Cross-Linked Gel Polymer Electrolyte Membranes for High Safety Lithium-Ion Batteries

Heat-resistant and rigid-flexible coupling glass-fiber nonwoven supported polymer electrolyte for high-performance lithium ion batteries

In Situ Solidified Gel Polymer Electrolytes for Stable Solid−State Lithium Batteries at High Temperatures

In‐situ construction of poly(tetraisopentyl acrylate) based gel polymer electrolytes with LixLa2‐xTiO3 for high energy density lithium‐metal batteries

Janus nanofibers with multiple Li+ transport channels and outstanding thermal stability for all-solid-state composite polymer electrolytes

Composite Solid Electrolyte for Solid-State Lithium Batteries Workable at Room Temperature

Unleashing the Potential of Li-Metal Batteries A Breakthrough Ultra-High Room-Temperature Ionic Conductivity Composite Solid-State Electrolyte

Electrospinning Fiber Membrane‐Derived Gel Polymer Electrolytes with High Mechanical Strength and Low Swelling Effect for High‐Safety Lithium Metal Batteries

Nylon-Based Composite Gel Membrane Fabricated via Sequential Layer-By-Layer Electrospinning for Rechargeable Lithium Batteries with High Performance

Polymer/ceramic gel electrolyte with in-situ interface forming enhances the performance of lithium metal batteries

Long cycling, thermal stable, dendrites free gel polymer electrolyte for flexible lithium metal batteries

Localized High Concentration Polymer Electrolyte Enabling Room Temperature Solid-State Lithium Metal Batteries with Stable LiF-rich Interphases

The intermolecular interaction enables ordered ion transport in quasi-solid-state electrolyte for ultra-long life lithium-metal battery

Monolithic Task‐Specific Ionogel Electrolyte Membrane Enables High‐Performance Solid‐State Lithium‐Metal Batteries in Wide Temperature Range