Abstract:The increasing demand for high-performance lithium-ion batteries has propelled the exploration of advanced materials to overcome limitations associated with commercially available polyolefin-based separators. This study introduces a pioneering approach involving the synthesis of a crosslinked hydrogel nanofiber membrane (PDs) composed of polyvinyl alcohol (PVA) and N, N-dimethylacrylamide (DMAAm) through the combination of the photo-polymerization with electrospinning process. To address key drawbacks observed in existing separators—namely, low porosity, inadequate thermal stability, and insufficient electrolyte wettability—the porosity of the PDs hydrogel nanofibers was systematically controlled through both heating drying (PD12-HD) and freeze-drying (PD12-FD) methods. The separator's properties and performance were thoroughly examined, focusing on its chemical, mechanical, thermal, swelling, morphological, conductivity, and electrochemical properties. Comprehensive characterization of the PD12-FD separator revealed remarkable attributes surpassing those of a commercial counterpart (Celgard). The PD12-FD separator demonstrated exceptional mechanical strength (16.3 MPa), robust thermal stability (no shrinkage or deformation at 170 °C), high porosity (84.66 %), substantial electrolyte uptake capacity (672.86 %), superior ionic conductivity (3.405 mS/cm), and high lithium-ion transfer number (tLi + = 0.678). The improvement is attributed to the cross-linked structure formed between PVA and DMAAm. Importantly, coin cells assembled with the PD12-FD separator exhibited outstanding electrochemical performance. Even after 150 cycles at 1C, the PD12-FD separator maintained a capacity above 95 % (145.48 mAh/g), surpassing both PVA and Celgard separators. This study proposes a novel methodology for fabricating hydrogel nanofiber separators and introduces a customizable synthesis approach for producing separators with enhanced performance and controlled characteristics.

Electro-Spun P(VDF-HFP)/Silica Composite Gel Electrolytes for High-Performance Lithium-Ion Batteries

Fumed silica-doped poly(butyl methacrylate-styrene)-based gel polymer electrolyte for lithium ion battery

Fabrication of Composite Gel Electrolyte and F-Doping Carbon/Silica Anode from Electro-Spun P(VDF-HFP)/Silica Composite Nanofiber Film for Advanced Lithium-Ion Batteries

Gel-based Composite Polymer Electrolytes with Novel Hierarchical Mesoporous Silica Network for Lithium Batteries

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

Nylon-Based Composite Gel Membrane Fabricated via Sequential Layer-By-Layer Electrospinning for Rechargeable Lithium Batteries with High Performance

Enhanced electrical properties of spun blend polymer composite electrolyte PMMA – PVdF-co-HFP – PEO/ LiBF4 containing nano SiO2 for lithium-ion batteries application

Gel Polymer Electrolytes Based on Silica-Added Poly(ethylene oxide) Electrospun Membranes for Lithium Batteries

A Trilayer Poly(Vinylidene Fluoride)/Polyborate/Poly(Vinylidene Fluoride) Gel Polymer Electrolyte with Good Performance for Lithium Ion Batteries

Synthesis and Properties of Polyvinylidene Fluoride-Hexafluoropropylene Copolymer/Li6PS5Cl Gel Composite Electrolyte for Lithium Solid-State Batteries

Bifunctional TiO 2-X Nanofibers Enhanced Gel Polymer Electrolyte for High Performance Lithium Metal Batteries

Dendritic mesoporous silica composite ionic liquid gel polymer electrolyte improves the performance of lithium battery

In Situ Composite of Nano SiO2–P(VDF-HFP) Porous Polymer Electrolytes for Li-ion Batteries

Electrospun of polyvinyl alcohol composite hydrogel nanofibers prepared by in-situ polymerization: A novel approach to fabricate hydrogel nanofiber membrane for lithium-ion batteries

In Situ Polymerized Zwitterionic Copolymer Ionic Gel Electrolytes with High Performance for Lithium-Ion Batteries

A novel single-ion conductor gel polymer electrolyte prepared by co-irradiation grafting and electrospinning process

Design of amphiphilic poly(vinylidene fluoride-co-hexafluoropropylene)-based gel electrolytes for high-performance lithium-ion batteries

A gel polymer electrolyte with Al2O3 nanofibers skeleton for lithium—sulfur batteries

Gel electrolyte and anode material derived from electro-spun polyacrylonitrile/polysilsesquioxane composite and application in advanced lithium-ion batteries

Electrospun gel composite electrolyte of solvent-free SiO 2 nanofluids coupled polyacrylonitrile nanofibers for high-rate lithium-metal batteries

Fabrication of mesoporous SiO 2 /P(VDF-HFP) composite membrane for high-performance lithium-ion batteries