Abstract:This study develops a syringe‐based, semi‐automatic environmental monitoring device for on‐site detection of harmful heavy metal ions in water. This portable device consists of a spring‐embedded syringe and a polydimethylsiloxane membrane‐based flow regulator for semi‐automatic fix‐and‐release fluidic valve actuation, and a paper‐based analytical device with two kinds of gold nanoclusters for sensitive Hg2+ and Co2+ ion detection, respectively. A syringe‐based, semi‐automatic environmental monitoring device is developed for on‐site detection of harmful heavy metal ions in water. This portable device consists of a spring‐embedded syringe and a polydimethylsiloxane (PDMS) membrane‐based flow regulator for semi‐automatic fix‐and‐release fluidic valve actuation, and a paper‐based analytical device (PAD) with two kinds of gold nanoclusters (AuNCs) for sensitive Hg2+ and Co2+ ion detection, respectively. The thickness of the elastic PDMS membrane can be adjusted to stabilize and modulate the flow rates generated by the pushing force provided by the spring attached to the plunger. Also, different spring constants can drastically alter the response time. People of all ages can extract the fix‐volume sample solutions and then release them to automatically complete the detection process, ensuring high reliability and repeatability. The PAD comprises two layers of modified paper, and each layer is immobilized with bovine serum albumin‐capped gold nanoclusters (R‐AuNCs) and glutathione‐capped gold clusters (G‐AuNCs), respectively. The ligands functionalized on the surface of the AuNCs not only can fine‐tune the optical properties of the nanoclusters but also enable specific and simultaneous detection of Hg2+ and Co2+ ions via metallophilic Au+–Hg2+ interaction and the Co2+–thiol complexation effect, respectively. The feasibility of the device for detecting heavy metal ions at low concentrations in various environmental water samples is demonstrated. The Hg2+ and Co2+ ions can be seen simultaneously within 20 min with detection limits as low as 1.76 nm and 0.27 μm, respectively, lower than those of the regulatory restrictions on water by the US Environmental Protection Agency and the European Union. we expect this sensitive, selective, portable, and easy‐to‐use device to be valid for on‐site multiple heavy metal ion pollution screenings in resource‐constrained settings.

Automated Determination of Cd2+ and Pb2+ in Natural Waters with Sequential Injection Analysis Device Using Differential Pulse Anodic Stripping Voltammetry

Full Automatic Monitor for In-Situ Measurements of Trace Heavy Metals in Aqueous Environment

The Study on Novel Microelectrode Array Chips for the Detection of Heavy Metals in Water Pollution

Simultaneous Determination of Cd(II) and Pb(II) Ions in Honey and Milk Samples Using a Single-Walled Carbon Nanohorns Modified Screen-Printed Electrochemical Sensor.

8.2.2 A High Spatial Resolution MEA for Voltammetric Analysis of Trace Metals in Water Pollution Based on Partial Least Squares Regression

An Automated Electronic Tongue for In-Situ Quick Monitoring of Trace Heavy Metals in Water Environment

Microelectrode array sensor chip for detection of heavy metals in water pollution

The Characterization of A Double-Side Nanoband Electrode Array and Its Application to Heavy Metals Detection

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Sensitive Voltammetric Detection of Trace Heavy Metals in Real Water Using Multi-Wall Carbon Nanotubes/Nafion Composite Film Electrode

A Semi‐Automatic Environmental Monitoring Device for Mercury and Cobalt Ion Detection

Development of a Sequential Injection Analysis Device and Its Application for the Determination of Mn(II) in Water.

Toward Rapid Detection of Trace Lead and Cadmium by Anodic Stripping Voltammetry in Complex Wastewater Streams

Simultaneous Determination of Cd(II) and Pb(II) Based on Bismuth Film/Carboxylic Acid Functionalized Multi-Walled Carbon Nanotubes-β-cyclodextrin-Nafion Nanocomposite Modified Electrode

Development of an immunochromatographic strip and its application in the simultaneous determination of Hg(II), Cd(II) and Pb(II)

Rapid detection of heavy metal ions based on a novel BMIMPF6-MWCNTs/GCE sensor and square wave voltammetry in actual water samples

Ultrasensitive Voltammetric Detection of Trace Lead(II) and Cadmium(II) Using MWCNTs‐Nafion/Bismuth Composite Electrodes

A Portable Electrochemical Workstation Using Disposable Screen-Printed Carbon Electrode Decorated with Multiwall Carbon Nanotube-Ionic Liquid and Bismuth Film for Cd(II) and Pb(II) Determination

Simultaneous Determination of Cadmium(ii), Lead(ii) and Copper(ii) by Using a Screen-Printed Electrode Modified with Mercury Nano-Droplets

Differential pulse anodic stripping voltammetric determination of Cd and Pb at a bismuth glassy carbon electrode modified with Nafion, poly(2,5-dimercapto-1,3,4-thiadiazole) and multiwalled carbon nanotubes

Highly Sensitive Simultaneous Determination of Cadmium (II), Lead (II), Copper (II), and Mercury (II) Ions on N-doped Graphene Modified Electrode