Abstract:Low-cost sulfurized polyacrylontrile (SPAN), which shows negligible polysulfide dissolution and stable cycling up to hundreds of cycles due to a solid-phase mechanism in carbonate-based electrolytes, is a valuable high-energy cathode material for long-lifespan lithium metal batteries (LMBs). 1 -3 However, the conventional carbonate-based electrolytes for commercial lithium-ion batteries are incompatible with lithium metal anodes (LMAs). 4 The unstable solid-electrolyte interphases (SEIs) result in lithium dendrite growth and low lithium stripping/plating CEs, which further cause safety concerns and limited lifespan of Li/SPAN cells with low negative to positive areal capacity (N/P) ratio. Therefore, the development of Li/sulfurized polyacrylonitrile (SPAN) batteries requires electrolytes that can form stable electrolyte/electrode interphases (EEIs) simultaneously on lithium metal anodes (LMAs) and SPAN cathodes. With the remarkable compatibility toward LMAs and low flammability, 4–7 locally concentrated ionic liquid electrolytes (LCILEs) might be promising candidates for Li/SPAN cells. Herein, a low-flammability locally concentrated ionic liquid electrolyte (LCILE) employing monofluorobenzene (mFBn) as the diluent is proposed for Li/SPAN cells. 8 Unlike non-solvating diluents in other LCILEs, mFBn partially solvates Li + , decreasing the coordination between Li + and bis(fluorosulfonyl)imide (FSI - ). In turn, this triggers a more substantial decomposition of FSI - and consequently results in the formation of a SEI rich in inorganic compounds, which enables a remarkable Coulombic efficiency (99.72%) of LMAs. Meanwhile, a protective cathode/electrolyte interphase (CEI), derived mainly from FSI - and organic cations, is generated on the SPAN cathodes, preventing the dissolution of polysulfides. Benefiting from the robust interphases simultaneously formed on both the electrodes, highly stable cycling of Li/SPAN cells for 250 cycles with a capacity retention of 71% is achieved employing the LCILE and only 80% lithium metal excess. References: (1) Wang, J. et al . A Novel Conductive Polymer-Sulfur Composite Cathode Material for Rechargeable Lithium Batteries. Adv. Mater. 2002 , 14 (13–14), 963–965. (2) Shen, Z. et al . Tailored Electrolytes Enabling Practical Lithium-Sulfur Full Batteries via Interfacial Protection. ACS Energy Lett. 2021 , 6 (8), 2673–2681. (3) Wu, Z. et al . Understanding the Roles of the Electrode/Electrolyte Interface for Enabling Stable Li∥Sulfurized Polyacrylonitrile Batteries. ACS Appl. Mater. Interfaces 2021 , 13 (27), 31733–31740. (4) Liu, X. et al . Enhanced Li + Transport in Ionic Liquid-Based Electrolytes Aided by Fluorinated Ethers for Highly Efficient Lithium Metal Batteries with Improved Rate Capability. Small Methods 2021 , 5 (7), 2100168. (5) Liu, X. et al . Locally Concentrated Ionic Liquid Electrolytes for Lithium-Metal Batteries. Angew. Chem. Int. Ed. 2023 , e202219318. (6) Liu, X. et al . Effect of Organic Cations in Locally Concentrated Ionic Liquid Electrolytes on the Electrochemical Performance of Lithium Metal Batteries. Energy Storage Mater. 2022 , 44 , 370–378. (7) Liu, X. et al . Difluorobenzene-Based Locally Concentrated Ionic Liquid Electrolyte Enabling Stable Cycling of Lithium Metal Batteries with Nickel-Rich Cathode. Adv. Energy Mater. 2022 , 12 (25), 2200862. (8) Liu, X. et al . Locally Concentrated Ionic Liquid Electrolyte with Partially Solvating Diluent for Lithium/Sulfurized Polyacrylonitrile Batteries. Adv. Mater. 2022 , 34 , 2207155.

Tailored Electrolytes Enabling Practical Lithium–Sulfur Full Batteries Via Interfacial Protection

Electrolyte Regulation Towards Stable Lithium‐Metal Anodes in Lithium–Sulfur Batteries with Sulfurized Polyacrylonitrile Cathodes

Integrated Configuration Design Strategy Via Cathode‐Gel Electrolyte With Forged Solid Electrolyte Interface Toward Advanced Lithium‐Sulfurized Polyacrylonitrile Batteries

Strategy for High-Energy Li-S Battery Coupling with a Li Metal Anode and a Sulfurized Polyacrylonitrile Cathode

Two birds with one stone: engineering siloxane-based electrolytes for high-performance lithium–sulfur polyacrylonitrile batteries

Challenges and Prospects of Electrolyte Design for Lithium‐Sulfurized Polyacrylonitrile Batteries

Lightweight Electrolyte Design for Li/Sulfurized Polyacrylonitrile (SPAN) Batteries

Regulating Interface Dipole Interaction between Ethers and Active Species toward Highly Stable Li‐SPAN Batteries

Realizing sulfurized polyacrylonitrile cathode in ether-based electrolyte

Scalable SPAN Membrane Cathode with High Conductivity and Hierarchically Porous Framework for Enhanced Ion Transfer and Cycling Stability in Li–S Batteries

Enhancing the performance of a lithium-sulfur battery with spatially confined mesoporous nanoreactors in sulfurized polyacrylonitrile cathodes

High-Performance Dual-Salt Electrolyte Based on Tetrahydrofuran and Dipropyl Ether for Lithium-Sulfur Battery

A Mixed Ether Electrolyte for Lithium Metal Anode Protection in Working Lithium–Sulfur Batteries

Bifunctional Li 2 Se Mediator to Accelerate Sulfur Conversion and Lithium Deposition Kinetics in Lithium–Sulfurized Polyacrylonitrile Batteries

Engineering Peculiar Cathode Electrolyte Interphase toward Sustainable and High‐Rate Li–S Batteries

Electrolyte Solvation Regulation Engineering Promotes Li-SPAN Battery without Esters

A novel mixed ether-based electrolyte for lithium–sulfur batteries with Li anode protection by dual salts

Locally Concentrated Ionic Liquid Electrolytes for Lithium/Sulfurized Polyacrylonitrile Batteries

Manipulating Electrolyte and Solid Electrolyte Interphase to Enable Safe and Efficient Li-S Batteries

Selenium-Doped Sulfurized Poly(acrylonitrile) Composites as Ultrastable and High-Volumetric-Capacity Cathodes for Lithium–Sulfur Batteries

Bifunctional Li2Se Mediator to Accelerate Sulfur Conversion and Lithium Deposition Kinetics in Lithium-Sulfurized Polyacrylonitrile Batteries