Abstract:Various issues on the constitutive relation, deformation, failure, and strength of a composite reinforced with either continuous or short fibers, or particles are systematically addressed based on Bridging Model and the true stress concept. The internal stresses in the fiber (standing for the reinforcement) and matrix obtained by Bridging Model or any other micromechanics model are homogenized quantities. They must be converted into true values. The conversion details are summarized in the paper. A constitutive relation of the composite outside an elastic region is affected by constituent plasticity, true stress effect and relative slippage displacement between debonded fiber and matrix interfaces, and has been established in the paper. Using the true stresses, various composite failures including ultimate strengths of a laminated composite can be predicted mainly against the fiber and matrix properties. Only the prediction for a processing dependent failure, either interface debonding, laminate delamination or fiber kinking failure, needs additionally an ultimate data of a unidirectional laminate measured upon existing standards. One of the best advantages of this paper is in that probably a minimum effort is needed to prepare the input data for a composite design. Another advantage is in that all of the involved formulae are analytical and in closed form, making the analysis for a composite structure comparable in computational amount to that made of an isotropic material.

Solutions Of Elastic Stress Field In Fiber Composites

Mechanical behavior of a fiber end in short fiber reinforced composites

An Analytical Model for Elastic Stress Field Distribution in Fibre Composite with Partially Debonded Interface

A New Analytical Model for Three-Dimensional Elastic Stress Field Distribution in Short Fibre Composite

Analyses of elastic stresses of fiber reinforced composite

ELASTIC WAVE SCATTERING AND DYNAMIC STRESS IN COMPOSITE WITH FIBER

Theory and Calculation of Stress Transfer Between Fiber and Matrix

STUDY OF INTERFACIAL STRESS OF SINGLE-FIBER COMPOSITE BY PHOTO-ELASTIC EXPERIMENT

Theoretical Study of the Stress Transfer in Single-Fibre Composites. Part II. Partially Debonded Fibre-Matrix Interface

Far-field Analytical Solution of Composite Materials Considering Steigmann-Ogden Surface

Discrete Element Method Models of Elastic and Elastoplastic Fiber Assemblies

FINITE ELEMENT NUMERICAL ANALYSIS OF TENSILE STRESS FIELD IN SHORT FIBER REINFORCED METAL MATRIX COMPOSITE

The Fiber-Matrix Interfacial Stress on and Beneath the Surface of Long-Fiber-Reinforced Composites

Scattering of Elastic Waves in an Elastic Matrix Containing an Inclusion with Interfaces

Elastic Waves In An Elastic Madium Containing An Inclusion With Interfaces

On the Elastic Stress Transfer and Longitudinal Modulus of Unidirectional Multi-Short-fiber Composites

3-D Elastic Analysis of Stress Transference Mechanism at the Interfaces in Fiber Reinforced Concrete

Finite Element Analysis of Thermal Residual Stress in Unidirectional Fiber Reinforced Composite

Thermal Residual Stresses and Stress Distributions under Tensile and Compressive Loadings of Short Fiber Reinforced Metal Matrix Composites

An Analytical Study of the Influence of Thermal Residual Stresses on the Elastic and Yield Behaviors of Short Fiber-Reinforced Metal Matrix Composites

Constitutive Relation, Deformation, Failure and Strength of Composites Reinforced with Continuous/short Fibers or Particles