Abstract:Textile Research Journal, Ahead of Print. Carbon fiber-reinforced epoxy matrix composite laminates have been widely used in the case of advanced aero-engines, due to their high specific mechanical properties and mature production technology. In order to predict accurately the transverse mechanical properties of composites, this paper developed a multiscale analysis method which consists of three scales: At the microscale, an interfacial cohesive zone model is established based on atomic potential energy to describe the interface. At the mesoscale, a unit cell model is established to represent the fiber, matrix, and interface. At the macroscale, the homogenization method, failure criteria, and damage degradation models are utilized to predict transverse mechanical properties. The results of predictions are compared with experimental tests, and it is found that the maximum errors are less than 3%. Furthermore, the predicted damage evolution path aligns with the experimental results, thus validating the accuracy of the multiscale analysis method. By employing the multiscale analysis method, the effects of interfacial strength on the macroscopic transverse mechanical properties are analyzed. The simulation results indicate that: The interfacial strength has a more pronounced influence on the transverse strength and ultimate strain compared with the transverse modulus. Reducing the interfacial strength has a greater influence on the transverse modulus, strength, and ultimate strain than increasing the interfacial strength. The interfacial cohesive zone model can reflect the nonlinearity of epoxy matrix composite materials. Overall, the multiscale analysis method proves to be effective in accurately predicting the transverse mechanical properties of composites, and provides insights into the interfacial strength's role in these properties.

On the Elastic Stress Transfer and Longitudinal Modulus of Unidirectional Multi-Short-fiber Composites

Mechanical behavior of a fiber end in short fiber reinforced composites

Analyses of the Micromechanics of Stress Transfer in Single- and Multi-Fiber Pull-Out Tests

Stress Transfer Model and Micromechanic Analyses of Unidirectional Single-short-fiber Composite

Analyses of elastic stresses of fiber reinforced composite

A New Model for the Transverse Modulus of Unidirectional Fiber Composites

Comparison of the Stress Transfer in Single- and Multi-Fiber Composite Pull-out Tests

Prediction of Longitudinal Elastic Modulus of Unidirectional Short-Fiber-reinforced Composites

Theoretical Study of the Stress Transfer in Single-Fibre Composites. Part II. Partially Debonded Fibre-Matrix Interface

Stress Transfer of Single-Fiber VS Multi-Fiber

Multiscale analysis method and experiments for the transverse mechanical property of unidirectional fiber-reinforced composites

Effect of Fiber Undulating Zone on the Macro Elastic Modulus of Fiber Winding Composites

Effective in Plane Moduli of Composites with a Micropolar Matrix and Coated Fibers

Stiffness Prediction of Short Fiber Reinforced Composites

A New Analytical Model for Three-Dimensional Elastic Stress Field Distribution in Short Fibre Composite

Effect of fiber arrangement on mechanical properties of short fiber reinforced composites

Theory and Calculation of Stress Transfer Between Fiber and Matrix

The Effect of a Graded Interphase on the Mechanism of Stress Transfer in a Fiber-Reinforced Composite

Three dimensional numerical analysis of effective properties of fiber reinforced polymer matrix composites

Micromechanical Modeling of Longitudinal Tensile Behavior and Failure Mechanism of Unidirectional Carbon Fiber/aluminum Composites Involving Fiber Strength Dispersion

Predicting Tensile Behaviors of Short Flax Fiber-Reinforced Polymer–matrix Composites Using a Modified Shear-Lag Model