Abstract:Since fiber-matrix interface strength is critical to properties of carbon fiber-reinforced composites, measurement and analysis of interface strength are crucial steps in tailored design of composites. In the present work, the single fiber push-out test and the short-beam shear test were applied to measure the fiber-matrix interface strength in uni-directionally and two-directionally carbon fiber-reinforced phenolic resin matrix composites. The technical difficulties in processing the specimen and in realizing the fiber push-out were also discussed and clarified. For obtaining the successful test, typically, the thickness of the specimen should be smaller than 100 mm. During the fiber push-out, the de-bonding and fiber sliding at the interface were analyzed from the load-displacement curve features. The results indicated that both methods could be applied to determine the interface strength. The single fiber push-out and the short-beam shear tests resulted in a similar phenomenon in regard to the interface strength of uni-directionally and two-directionally carbon fiber-reinforced phenolic resin matrix composites, but expressed different values. The low interface strength measured from the short-beam shear test could be associated with multiple interlaminar shear failures. Furthermore, it was found that the interface strength of uni-directionally carbon fiber-reinforced phenolic resin matrix composites is somewhat higher than that of two-directionally carbon fiber-reinforced phenolic resin matrix composites. The difference in the interface strength could be attributed to the thermally induced residual stresses caused by the coefficient of thermal expansion mismatch of fiber and matrix. The approaches applied in the current work can be used for the evaluation of the interface strength of carbon fiber-reinforced phenolic resin matrix composites with different fiber-matrix bonding properties.

The Fiber-Matrix Interfacial Stress on and Beneath the Surface of Long-Fiber-Reinforced Composites

Micro Failure Analysis of Fiber Metal Laminates

STUDY OF INTERFACIAL STRESS OF SINGLE-FIBER COMPOSITE BY PHOTO-ELASTIC EXPERIMENT

A novel approach based on stress-impedance effect to assess the interfacial properties in fiber-reinforced composites

Finite Element Analysis of Interfacial Stress of Mg-Baced Composites Reinforced with Short Fiber

STUDY ON INTERFACIAL THERMAL RESIDUAL STRESS OF SINGLE-FIBER RESIN MATRIX COMPOSITE MATERIALS

The interface shear stress analysis of Boron fiber/epoxy composites

Theoretical Study of the Stress Transfer in Single-Fibre Composites. Part II. Partially Debonded Fibre-Matrix Interface

Pre-use Interfacial Shear Strength Prediction for Fiber-Reinforced Thermosetting Composites Based on Stress-Impedance Effect of Ferromagnetic Microwires

Finite Element Analysis of Interfacial Debonding Damage in Fiber-Reinforced Ceramic Matrix Composites

Prediction of Interfacial Debonding in Fiber‐Reinforced Composite Laminates

Analyses of elastic stresses of fiber reinforced composite

Stress Concentration Factor in the Matrix Reinforced with Fiber Having an Interface Layer

Stress Concentration Factor in Matrix of A Composite Reinforced with Transversely Isotropic Fibers

Evaluation of in-situ fiber/matrix interfacial properties

Study on the Interfacial Shear Stress of a Shape Memory Alloy Long-Fiber Reinforced Composite

Finite Element Analysis of Thermal Residual Stress in Unidirectional Fiber Reinforced Composite

Interfacial Stress Transfer Behavior of Single-Fiber Composite under the Effect of Mechanical and Thermal Loading

Measurement of Tensile and Shear Strength of Interfacial Bonding in Fiber Reinforced Soft Composites Combining Experiments and Simulation

Interfacial Stress Analysis of RC Beams Strengthened with Hybrid CFS and GFS

Measurement and analysis of fiber-matrix interface strength of carbon fiber-reinforced phenolic resin matrix composites