Abstract:A three-dimensional fluid model is developed to investigate the radio-frequency inductively coupled H2 plasma in a reactor with a rectangular expansion chamber and a cylindrical driver chamber, for neutral beam injection system in CFETR. In this model, the electron effective collision frequency and the ion mobility at high E-fields are employed, for accurate simulation of discharges at low pressures (0.3 Pa–2 Pa) and high powers (40 kW–100 kW). The results indicate that when the high E-field ion mobility is taken into account, the electron density is about four times higher than the value in the low E-field case. In addition, the influences of the magnetic field, pressure and power on the electron density and electron temperature are demonstrated. It is found that the electron density and electron temperature in the xz-plane along permanent magnet side become much more asymmetric when magnetic field enhances. However, the plasma parameters in the yz-plane without permanent magnet side are symmetric no matter the magnetic field is applied or not. Besides, the maximum of the electron density first increases and then decreases with magnetic field, while the electron temperature at the bottom of the expansion region first decreases and then almost keeps constant. As the pressure increases from 0.3 Pa to 2 Pa, the electron density becomes higher, with the maximum moving upwards to the driver region, and the symmetry of the electron temperature in the xz-plane becomes much better. As power increases, the electron density rises, whereas the spatial distribution is similar. It can be summarized that the magnetic field and gas pressure have great influence on the symmetry of the plasma parameters, while the power only has little effect.

Influence of Magnetic Filter Field on the Radio-Frequency Negative Hydrogen Ion Source of Neutral Beam Injector for China Fusion Engineering Test Reactor

Numerical Investigation of Radio-Frequency Negative Hydrogen Ion Sources by a Three-Dimensional Fluid Model*

Three-dimensional Modeling of the Large and Powerful Radio Frequency Negative Hydrogen Ion Source with Faraday Shield

3D Fluid Model Analysis on the Generation of Negative Hydrogen Ions for Negative Ion Source of NBI

3D modeling of a double-driver ion source considering ion magnetization: an investigation of plasma symmetry modulation methods

Optimization design of magnetic filter for the prototype RF negative ion source at ASIPP

Study on the Plasma Parameters of RF Negative Ion Source for Associated Particle Neutron Generator

Influence of cusp magnetic field configuration on plasma parameters of radio frequency driven negative ion source for CRAFT NNBI

Experimental results of a magnetic field modification to the radio frequency driver of a negative ion source

Physics and engineering design of 400 keV H- accelerator for negative ion based neutral beam injection system in China

Study on stray electrons ejecting from a long-pulse negative ion source for fusion

Numerical simulation studies on negative hydrogen ion source for uniformity of H - ion beam

Magnetic and High-frequency Electromagnetic Field Analysis in Electron Cyclotron Resonance Thruster

Three-dimensional simulation of electron extraction process and optimization of magnetic field based on multi-aperture structure of negative hydrogen ion source

Simulation study on the discharge of radio frequency ion source for EAST neutral beam injector

Numerical Simulation of the Internal Flow in Microwave Plasma Thruster in Magnetic Field

Numerical Simulation Research of Plasma Characteristics in a Multi-Cusp Proton Source Based on Magnets Layout

Structure design and analysis of RF ion source for negative ion source test facility

Analysis of the Characteristics of the Plasma of an RF Driven Ion Source for a Neutral Beam Injector

RF Simulation and Improvements of an Ion Source Test Facility at HUST

Research and development progress of radio frequency ion source for neutral beam injector at ASIPP