Abstract:A three-dimensional fluid model is developed to investigate the radio-frequency inductively coupled H2 plasma in a reactor with a rectangular expansion chamber and a cylindrical driver chamber, for neutral beam injection system in CFETR. In this model, the electron effective collision frequency and the ion mobility at high E-fields are employed, for accurate simulation of discharges at low pressures (0.3 Pa–2 Pa) and high powers (40 kW–100 kW). The results indicate that when the high E-field ion mobility is taken into account, the electron density is about four times higher than the value in the low E-field case. In addition, the influences of the magnetic field, pressure and power on the electron density and electron temperature are demonstrated. It is found that the electron density and electron temperature in the xz-plane along permanent magnet side become much more asymmetric when magnetic field enhances. However, the plasma parameters in the yz-plane without permanent magnet side are symmetric no matter the magnetic field is applied or not. Besides, the maximum of the electron density first increases and then decreases with magnetic field, while the electron temperature at the bottom of the expansion region first decreases and then almost keeps constant. As the pressure increases from 0.3 Pa to 2 Pa, the electron density becomes higher, with the maximum moving upwards to the driver region, and the symmetry of the electron temperature in the xz-plane becomes much better. As power increases, the electron density rises, whereas the spatial distribution is similar. It can be summarized that the magnetic field and gas pressure have great influence on the symmetry of the plasma parameters, while the power only has little effect.

3D modeling of a double-driver ion source considering ion magnetization: an investigation of plasma symmetry modulation methods

Numerical Investigation of Radio-Frequency Negative Hydrogen Ion Sources by a Three-Dimensional Fluid Model*

Influence of Magnetic Filter Field on the Radio-Frequency Negative Hydrogen Ion Source of Neutral Beam Injector for China Fusion Engineering Test Reactor

Three-dimensional Modeling of the Large and Powerful Radio Frequency Negative Hydrogen Ion Source with Faraday Shield

An ion species model for positive ion sources - part I description of the model

Three-dimensional simulation of electron extraction process and optimization of magnetic field based on multi-aperture structure of negative hydrogen ion source

Numerical Simulation Research of Plasma Characteristics in a Multi-Cusp Proton Source Based on Magnets Layout

Influence of cusp magnetic field configuration on plasma parameters of radio frequency driven negative ion source for CRAFT NNBI

Numerical simulation studies on negative hydrogen ion source for uniformity of H - ion beam

3D Fluid Model Analysis on the Generation of Negative Hydrogen Ions for Negative Ion Source of NBI

3D Simulation of the Electron Energy Distribution in Negative Hydrogen Ion Source

Modeling inductive radio frequency coupling in powerful negative hydrogen ion sources: optimizing the RF coupling

Numerical research of a 2D axial symmetry hybrid model for the radio-frequency ion thruster

Numerical study of RF power coupling in fusion-relevant single- and multi-driver H$^-$ ion sources

Optimization design of magnetic filter for the prototype RF negative ion source at ASIPP

Simulation study on the discharge of radio frequency ion source for EAST neutral beam injector

A three-dimensional particle-in-cell/Monte Carlo computer simulation based on negative hydrogen ion source

Study on the Plasma Parameters of RF Negative Ion Source for Associated Particle Neutron Generator

Structure design and analysis of RF ion source for negative ion source test facility

Analysis of the Characteristics of the Plasma of an RF Driven Ion Source for a Neutral Beam Injector

Study on stray electrons ejecting from a long-pulse negative ion source for fusion