Abstract:The increasing demand for high-performance lithium-ion batteries has propelled the exploration of advanced materials to overcome limitations associated with commercially available polyolefin-based separators. This study introduces a pioneering approach involving the synthesis of a crosslinked hydrogel nanofiber membrane (PDs) composed of polyvinyl alcohol (PVA) and N, N-dimethylacrylamide (DMAAm) through the combination of the photo-polymerization with electrospinning process. To address key drawbacks observed in existing separators—namely, low porosity, inadequate thermal stability, and insufficient electrolyte wettability—the porosity of the PDs hydrogel nanofibers was systematically controlled through both heating drying (PD12-HD) and freeze-drying (PD12-FD) methods. The separator's properties and performance were thoroughly examined, focusing on its chemical, mechanical, thermal, swelling, morphological, conductivity, and electrochemical properties. Comprehensive characterization of the PD12-FD separator revealed remarkable attributes surpassing those of a commercial counterpart (Celgard). The PD12-FD separator demonstrated exceptional mechanical strength (16.3 MPa), robust thermal stability (no shrinkage or deformation at 170 °C), high porosity (84.66 %), substantial electrolyte uptake capacity (672.86 %), superior ionic conductivity (3.405 mS/cm), and high lithium-ion transfer number (tLi + = 0.678). The improvement is attributed to the cross-linked structure formed between PVA and DMAAm. Importantly, coin cells assembled with the PD12-FD separator exhibited outstanding electrochemical performance. Even after 150 cycles at 1C, the PD12-FD separator maintained a capacity above 95 % (145.48 mAh/g), surpassing both PVA and Celgard separators. This study proposes a novel methodology for fabricating hydrogel nanofiber separators and introduces a customizable synthesis approach for producing separators with enhanced performance and controlled characteristics.

Reinforce the Adhesion of Gel Electrolyte to Electrode and the Interfacial Charge Transfer Via in Situ Electrospinning the Polymeric Nanofiber Matrix

Preparation and Properties of Gel Membrane Containing Porous PVDF-HFP Matrix and Cross-Linked PEG for Lithium Ion Conduction

Novel Configuration of Polyimide Matrix-Enhanced Cross-Linked Gel Separator for High Performance Lithium Ion Batteries

Fabrication of Composite Gel Electrolyte and F-Doping Carbon/Silica Anode from Electro-Spun P(VDF-HFP)/Silica Composite Nanofiber Film for Advanced Lithium-Ion Batteries

Investigation of cyano resin-based gel polymer electrolyte: In situ gelation mechanism and electrode-electrolyte interfacial fabrication in lithium-ion battery

Nylon-Based Composite Gel Membrane Fabricated via Sequential Layer-By-Layer Electrospinning for Rechargeable Lithium Batteries with High Performance

Facile Fabrication of Binder-free Metallic Tin Nanoparticle/Carbon Nanofiber Hybrid Electrodes for Lithium-ion Batteries

Gel electrolyte and anode material derived from electro-spun polyacrylonitrile/polysilsesquioxane composite and application in advanced lithium-ion batteries

Crosslinked Electrospun Poly(vinylidene Difluoride) Fiber Mat As a Matrix of Gel Polymer Electrolyte for Fast-Charging Lithium-Ion Battery

Electrospun of polyvinyl alcohol composite hydrogel nanofibers prepared by in-situ polymerization: A novel approach to fabricate hydrogel nanofiber membrane for lithium-ion batteries

A strong nucleophilic fluorination agent to achieve highly stable in-situ 3D cross-linked gel polymer electrolyte for lithium-ion batteries

Electro-Spun P(VDF-HFP)/Silica Composite Gel Electrolytes for High-Performance Lithium-Ion Batteries

In Situ Formation of Gel Electrolyte with Enhanced Diffusion Kinetics and Stability for Achieving Fast‐Charging Li‐Ion Batteries

Crosslinked Gel Polymer Electrolyte from Trimethylolpropane Triglycidyl Ether by In Situ Polymerization for Lithium-Ion Batteries

In-situ Crosslinked Gel Polymer Electrolytes Based on Ionic Monomers as Charge Carriers for Lithium-Ion Batteries

In Situ Polymerized Zwitterionic Copolymer Ionic Gel Electrolytes with High Performance for Lithium-Ion Batteries

Integration of Porous High‐Loading Electrode and Gel Polymer Electrolyte for High‐Performance Quasi‐Solid‐State Battery

UV-curable PVdF-HFP-based gel electrolytes with semi-interpenetrating polymer network for dendrite-free Lithium metal batteries

Enabling interfacial stability via 3D networking single ion conducting nano fiber electrolyte for high performance lithium metal batteries

Polymers/zeolite Nanocomposite Membranes with Enhanced Thermal and Electrochemical Performances for Lithium-Ion Batteries

Gel polymer electrolytes for lithium ion batteries: Fabrication, characterization and performance