Abstract:The near-field magnetic probe ( -probe) is an essential diagnostic tool for analyzing electromagnetic interference in electronic products. Many types of -probes have been designed and manufactured in recent years. Nevertheless, the performance of these probes in practical magnetic field ( -field) measurement is not clear. In this article, six typical -probes with the same loop area, labeled as UHP11, SHP11, UHP12, SHP12, UHP22, and SHP22, are designed and fabricated. The key parameters that can evaluate the performance of -probes include frequency response (FR), intrusion of the probe to the device under test (DUT), spatial resolution (SR), common-mode electric field ( -field) suppression, and differential -field suppression. To analyze the key parameters of these probes, full-wave models of these -probes are simulated and compared with measurements. Meanwhile, the equivalent circuit models of these -probes are established to analyze -field suppression in -field measurement. The measurement results indicate that the shielded one-loop -probe with differential output ports (SHP12) achieves the best differential -field suppression, which is 26 dB at 5 GHz. In addition to the outstanding suppression performance on differential -field, its common-mode -field suppression is also the best and greater than 30 dB within 14.3 GHz. The SR of six -probes is basically consistent in the measurement. Except for the higher sensitivity of the two-loop -probes (UHP22 and SHP22), SHP12 shows the best comprehensive -field measurement performance.

A Pair of Parallel Differential Magnetic‐field Probes with High Measurement Accuracy and High Electric‐field Suppression Ratio

A Pair of Parallel Differential Magnetic-Field Probes with High Spatial Resolution and Wide Frequency Bandwidth

Dual-Components Magnetic Probe for Electromagnetic Interference Measurement

New resonant composite magnetic‐field probes with high detection sensitivity and electric‐field suppression ratio

An Ultrawideband Magnetic Probe With High Electric Field Suppression Ratio

Ultrawideband Differential Magnetic Near Field Probe with High Electric Field Suppression

A New Differential Magnetic-Field Probe With Parasitic Elements for Near-Field Scanning

A new differential magnetic‐field probe with high detection sensitivity for near‐field scanning

A High-Frequency and High Spatial Resolution Probe Design for EMI Prediction

Symmetrical double-loop H-field probe with floating shield for improving sensitivity and electric field suppression

A Cross-Type $e_{x}$ Probe with a High $h_{y}$ Suppression

Comparative Analysis of Several Near-Field Probes for Magnetic Field Measurements

A Composite Probe With Connected Via for High Sensitivity Measurement of Electromagnetic-Field Components

Design and Characterization of a Multi-Processed Differential Magnetic Field Probe by Using Asymmetric Calibration Method

Miniature Active Differential Magnetic Field Probe with High Sensitivity for Near-Field Measurements

A Wideband and High Sensitivity Probe Design for Near-Field Scanning

High Common-Mode-Rejection Magnetic-Field Probe Based on Differential Dual Loop and Integrated Balun

Differential Magnetic Probe Based on Balanced Filter with High Electric Field Suppression

Design and Calibration of an Ungrounded Double-Loop Active Differential Magnetic Probe

A Two‐turn Loop Active Magnetic Field Probe Design for High Sensitivity Near‐field Measurement

A Resonant Magnetic Field Probe with Enhanced Sensitivity Using Quarter-wavelength Impedance Transformer