Abstract:The near-field magnetic probe ( -probe) is an essential diagnostic tool for analyzing electromagnetic interference in electronic products. Many types of -probes have been designed and manufactured in recent years. Nevertheless, the performance of these probes in practical magnetic field ( -field) measurement is not clear. In this article, six typical -probes with the same loop area, labeled as UHP11, SHP11, UHP12, SHP12, UHP22, and SHP22, are designed and fabricated. The key parameters that can evaluate the performance of -probes include frequency response (FR), intrusion of the probe to the device under test (DUT), spatial resolution (SR), common-mode electric field ( -field) suppression, and differential -field suppression. To analyze the key parameters of these probes, full-wave models of these -probes are simulated and compared with measurements. Meanwhile, the equivalent circuit models of these -probes are established to analyze -field suppression in -field measurement. The measurement results indicate that the shielded one-loop -probe with differential output ports (SHP12) achieves the best differential -field suppression, which is 26 dB at 5 GHz. In addition to the outstanding suppression performance on differential -field, its common-mode -field suppression is also the best and greater than 30 dB within 14.3 GHz. The SR of six -probes is basically consistent in the measurement. Except for the higher sensitivity of the two-loop -probes (UHP22 and SHP22), SHP12 shows the best comprehensive -field measurement performance.

A Two‐turn Loop Active Magnetic Field Probe Design for High Sensitivity Near‐field Measurement

A Wideband and High Sensitivity Probe Design for Near-Field Scanning

Symmetrical double-loop H-field probe with floating shield for improving sensitivity and electric field suppression

A Miniature Multi-Component Probe for Near-Field Scanning

A Resonant Magnetic Field Probe with Enhanced Sensitivity Using Quarter-wavelength Impedance Transformer

A Sensitive Dual-Stage Active Wideband Electric Field Probe for Near-Field Measurements

Dual-Components Magnetic Probe for Electromagnetic Interference Measurement

Design and Calibration of an Ungrounded Double-Loop Active Differential Magnetic Probe

A High-Frequency and High Spatial Resolution Probe Design for EMI Prediction

A Miniature High Sensitivity Active Electric Field Probe for Near-Field Measurement

Miniature Active Differential Magnetic Field Probe with High Sensitivity for Near-Field Measurements

Investigation of Multilayer Print Circuit Board Probe with Temperature Compensation for Ultra-Wideband Near-Field Measurement

A Miniaturized Ultrawideband Active Electric Probe With High Sensitivity for Near-Field Measurement

A Miniature Wideband Active Magnetic Probe Design with High Spatial Resolution and High Sensitivity for Near-Field Measurement

Comparative Analysis of Several Near-Field Probes for Magnetic Field Measurements

New resonant composite magnetic‐field probes with high detection sensitivity and electric‐field suppression ratio

A new differential magnetic‐field probe with high detection sensitivity for near‐field scanning

A Miniature Resonant Magnetic Field Probe Integrated with MLCC

Design and Characterization of a Multi-Processed Differential Magnetic Field Probe by Using Asymmetric Calibration Method

A Pair of Parallel Differential Magnetic-Field Probes with High Spatial Resolution and Wide Frequency Bandwidth

A Composite Probe With Connected Via for High Sensitivity Measurement of Electromagnetic-Field Components