Abstract:Internet-of-Things (IoT) applications require nW-power current references that are robust to process, voltage and temperature (PVT) variations, to maintain the performance of IoT sensor nodes in a wide range of operating conditions. However, nA-range current references are rarely area-efficient due to the use of large gate-leakage transistors or resistors, which occupy a significant silicon area at this current level. In this paper, we introduce a nA-range constant-with-temperature (CWT) current reference, relying on a self-cascode MOSFET (SCM) biased by a four-transistor ultra-low-power voltage reference through a single-transistor buffer. The proposed reference includes a temperature coefficient (TC) calibration mechanism to maintain performance across process corners. In addition, as the proposed design relies on the body effect, it has been fabricated and measured in 0.11-$\mu$m bulk and 22-nm fully-depleted silicon-on-insulator (FD-SOI) to demonstrate feasibility in both technology types. On the one hand, the 0.11-$\mu$m design consumes a power of 16.8 nW at 1.2 V and achieves a 2.3-nA current with a line sensitivity (LS) of 2.23 %/V at 25°C and a TC of 176 ppm/°C at 1.2 V from -40 to 85°C. On the other hand, the 22-nm design consumes a power of 16.3 nW at 1.5 V and achieves a 2.5-nA current with a 1.53-%/V LS at 25°C and an 82-ppm/°C TC at 1.5 V from -40 to 85°C. Thanks to their simple architecture, the proposed references achieve a silicon area of 0.0106 mm$^2$ in 0.11 $\mu$m and 0.0026 mm$^2$ in 22 nm without compromising other figures of merit, and are thus competitive with state-of-the-art CWT references operating in the same current range.

A Self‐biased and All‐in‐one Voltage and Current Reference

New Technique: A Low Drift Current Reference Based on PMOS Temperature Correction Technology.

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

A current reference based on bandgap technology with wide input voltage range by using 0.18µm BCD process

A Sub-1-V Nanopower MOS-Only Voltage Reference

A 1.2V Self-Referenced Temperature Sensor with a Time-Domain Readout and a Two-Step Improvement on Output Dynamic Range

A New Cmos Current Reference with High Order Temperature Compensation

A 1.1- / 0.9-nA Temperature-Independent 213- / 565-ppm/$^\circ$C Self-Biased CMOS-Only Current Reference in 65-nm Bulk and 22-nm FDSOI

Current Reference with Low Temperature Drift and Low Power Supply

A 2.5-nA Area-Efficient Temperature-Independent 176-/82-ppm/°C CMOS-Only Current Reference in 0.11-$μ$m Bulk and 22-nm FD-SOI

A Resistorless CMOS Voltage Reference Based on Mutual Compensation of $V_{T}$ and $v_{\rm TH}$

Current Reference with Temperature Compensation for Low Power Applications

Untrimmed CMOS Nano-Ampere Current Reference with Curvature-Compensation Scheme

A CMOS Voltage Reference Based on Mutual Compensation of Vtn and Vtp

A Resistorless Low-Power Voltage Reference With Novel Curvature-Compensation Technique

A 1.65‐nW 11.14‐ppm/°C self‐biased subthreshold CMOS voltage reference with temperature compensation circuit

A voltage reference circuit with ultra-low power using subthreshold and body effect techniques

A sub-1 V 115nA 0.35μm CMOS voltage reference for ultra low-power applications

A 48 Pw, 0.34 V, 0.019%/V Line Sensitivity Self-Biased Subthreshold Voltage Reference with DIBL Effect Compensation

Improved Design of a Super Low Voltage Reference

A 30na Temperature-Independent CMOS Current Reference and Its Application in an LDO