Abstract:Fischer-Tropsch synthesis is an important way to replace crude oil resources to sustainable energy in the future, and an important process for catalytic conversion of syngas into clean fuel and high value-added chemicals. Iron-based catalysts have been widely used in industrial production due to their advantages of low cost, flexible operation and water-gas conversion activity. However, the phase change of iron-based catalysts during the reaction process is very complex. As many as seven iron species including elemental iron and different types of iron oxide iron carbide are considered to have Fischer-Tropsch synthesis activity. It is very important to understand the evolution of iron species and their roles in the reaction for clarifying the structure-activity relationship of catalysts and designing efficient industrial catalysts. Hematite Fe 3 O 4 is often used as the precursor oxide of iron based catalyst, which is converted into iron carbide during the reaction process. It is often considered as an inactivated phase and has high water-gas conversion activity, leading to high CO 2 selectivity. Wang et al prepared Fe 3 O 4 catalyst by using metal organic framework（MOF） as precursor, which would be converted into Fe 3 O 4 @Fe 5 C 2 during the reaction process. Therefore, the author believed that Fe 5 C 2 phase was the key to the catalyst activity. Herein, We used graphene as the support and used the classic preparation method of supported catalyst-impregnation method to prepare iron-based catalyst with different loading capacity. The Fe 3 O 4 particles were grown by calcinating at high temperature to prevent excessive carbonization in the reaction process, and the properties of Fe 3 O 4 phase were investigated. The results of reaction performance test show that Fe 3 O 4 species itself has a certain activity of CO hydrogenation, and the carbonization process of large Fe 3 O 4 particles（＞200 nm） in the reaction process will be inhibited to a certain extent. With the increase of reaction time, part of Fe 3 O 4 is carbonized into iron carbide, and the catalyst activity increases, indicating that the activity of iron carbide species is higher than that of Fe 3 O 4 .

A Hydrophilic Supported Fe 3 O 4 Catalyst with Enhanced Light Olefins Selectivity in the Fischer‐Tropsch Synthesis

The Effect of Hydrophobically Modified Iron Catalysts with Hexadecyltrimethoxysilane on Fischer‐Tropsch Synthesis

Preparation of Fe@Si/S-34 Catalysts and Its Catalytic Performance for Syngas to Olefins

Direct Production of Hydrocarbons by Fischer-Tropsch Synthesis Using Newly Designed Catalysts

Hydrophobic Fe‐Based Catalyst Derived from Prussian Blue for Enhanced Photothermal Conversion of Syngas to Light Olefins

Enhancing the synergism of Fe3O4 and Fe5C2 to improve the process of CO2 hydrogenation to olefines

Efficient Fischer-Tropsch to light olefins over iron-based catalyst with low methane selectivity and high olefin/paraffin ratio

Improved olefin selectivity during CO hydrogenation on hydrophilic Fe/HAP catalysts

Enhanced Fischer-Tropsch synthesis performance on fe + ZSM5 bifunctional catalysts

Photo-Driven Syngas Conversion to Lower Olefins over Oxygen-Decorated Fe5C2 Catalyst

Effect of Graphitic Carbon Modification on the Catalytic Performance of Fe@SiO2-GC Catalysts for Forming Lower Olefins Via Fischer-Tropsch Synthesis.

Supported Fe2C catalysts originated from Fe2N phase and active for Fischer-Tropsch synthesis

Effects of Rare Earth Metal Promotion over Zeolite-Supported Fe–Cu-Based Catalysts on the Light Olefin Production Performance in Fischer–Tropsch Synthesis

Electronically Activated Fe 5 C 2 via N-Doped Carbon to Enhance Photothermal Syngas Conversion to Light Olefins

Effects of surface hydrophobization on the phase evolution behavior of iron-based catalyst during Fischer–Tropsch synthesis

Mechanistic insight into accelerating of light olefin products by surface OH* group on the Fe 5 C 2 catalyst

Preparation of Graphene-Supported Fe3O4 Model Catalysts for Fischer-Tropsch Synthesis

Research Progress on the Effects of Support and Support Modification on the FTO Reaction Performance of Fe-Based Catalysts

Insight into the Physicochemical Properties of Co-Based Catalysts in Fischer–Tropsch Synthesis

Enhanced Conversion of Syngas to Gasoline-Range Hydrocarbons over Carbon Encapsulated Bimetallic FeMn Nanoparticles

Iron oxide nanoparticles supported on pyrolytic graphene oxide as model catalysts for Fischer Tropsch synthesis