Abstract:VO2 nanobelts with metal–semiconductor properties were prepared through low temperature hydrothermal reaction and post annealing. X-Ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), differential scanning calorimetry (DSC) and UV-vis-NIR spectrophotometry were employed to investigate the evolution of structure, morphology and properties of the VO2 nanobelts. The results illustrate that the pure VO2 (B) nanobelts can be obtained by hydrothermal reaction. The shape of the nanobelts evolves with hydrothermal temperature, time and reactant concentration. With the increasing of hydrothermal temperature from 160 °C to 200 °C, the nanobelts become homogenous and regular. The regular nanobelts are also obtained by the decrease of V2O5 concentration. Samples prepared at 200 °C over 48 h have superior morphology and crystallinity. After annealing, VO2 (B) can be transformed into VO2 (M), which is dependent on the hydrothermal conditions. Samples prepared at 160 °C over 48 h and 180 °C over 48 h can be transformed into VO2 (M) at 450 °C over 2 h, while samples obtained at 200 °C over 48 h should be annealed at 500 °C for 2 h. The nanobelts are transformed into irregular nanostructures, nanorods and nanobelts at the hydrothermal temperatures of 160 °C, 180 °C and 200 °C, respectively. However, samples prepared at 200 °C over 48 h with a V2O5 concentration of 0.0125 M can keep the intact nanobelts after annealing. The DSC analysis proves that the VO2 (M) shows good phase transition behavior around 68 °C and the phase transition temperature can be reduced to 58 °C by 0.5 at% tungsten doping. After mixing the VO2 (M) with acrylic resin, the visible transmission of the VO2 composite coating on glass is up to 52.2% and the solar modulation at 2000 nm is up to 31.5%, which means that it is a good candidate for smart windows.

Wet Chemistry Vitrification and Metal‐to‐Semiconductor Transition of 2D Gray Arsenene Nanoflakes

Atomic Investigation on the Facet‐Dependent Melting of Ceramic Nanostructures Via in Situ Electron Irradiation

Van Der Waals Epitaxial Growth and Interfacial Passivation of Two-Dimensional Single -Crystalline Few -Layer Gray Arsenic Nanoflakes

Water-Assisted Preparation of High-Purity Semiconducting (14,4) Carbon Nanotubes

Tunable electronic and magneto-optical properties of monolayer arsenene: From GW0 approximation to large-scale tight-binding propagation simulations

Lithium Ion Intercalation-Induced Metal-Insulator Transition in Inclined-Standing Grown 2D Non-Layered Cr2S3 Nanosheets

A Facile Process to Prepare One Dimension VO2nanostructures with Superior Metal–semiconductor Transition

2D Arsenene and Arsenic Materials: Fundamental Properties, Preparation, and Applications

Atomically Thin Arsenene And Antimonene: Semimetal-Semiconductor And Indirect-Direct Band-Gap Transitions

Theoretical studies on tunable electronic structures and potential applications of two-dimensional arsenene-based materials

Volume‐Confined Fabrication of Large‐Scale Single‐Crystalline Molecular Ferroelectric Thin Films and Their Applications in 2D Materials

Dimension Engineering of Narrow Bandgap Semiconductor InAs Nanostructures in Wafer-Scale

Thermally driven V2O5 nanocrystal formation and the temperature-dependent electronic structure study

Layered Crystalline ZnIn2S4nanosheets: CVD Synthesis and Photo-Electrochemical Properties

Controllable Growth of 2D V3S5 Single Crystal by Chemical Vapor Deposition

From 2d Nanoflats to 2d Nanowire Networks: A Novel Hyposulfite Self-Decomposition Route to Semiconductor Fes2 Nanowebs

Black Arsenic: A Layered Semiconductor with Extreme in-plane Anisotropy

Non-invasive digital etching of van der Waals semiconductors

Electrochemical molecular intercalation and exfoliation of solution-processable two-dimensional crystals

In-Plane Optical and Electrical Anisotropy of 2D Black Arsenic